Getting Started
Mini Remote Control
The Mini Remote Control is a simplified remote control that consists of the power, channel and volume buttons only.
¦¦ Description
| Power On/Off button | IrDA transmitter |
| ✎✎ Point the IrDA transmitter at the TV | |
|
| |
Next channel |
| to use the mini remote. |
|
| |
Volume decrease | Volume increase |
|
Previous channel |
|
|
✎✎This is a special remote control for the visually impaired and has Braille points on the Channel and Volume buttons.
¦¦ Inserting the battery
1.Turn the battery cover counterclockwise to unlock it and then separate the battery cover.
2.Insert a 3V Lithium battery with the + side facing down into the battery cover.
3.Place the battery cover into the remote control aligning it with the grooves and then turn the battery cover clockwise to lock the cover.
✎✎If the remote control doesn’t work, check the following: xx Is the TV power on?
xx Are the plus and minus ends of the batteries reversed? xx Are the batteries drained?
xx Is there a power outage or is the power cord unplugged? xx Is there a special fluorescent light or neon sign nearby?
¦¦ Operating specification for dual view
OPEN
CLOSE
Touch Control
|
|
|
|
|
|
| ATV | AV | Comp. | PC | HDMI |
ATV | △ | X | O | O | O |
|
|
|
|
|
|
AV | X | △ | X | X | X |
Comp. | X | X | △ | X | X |
|
|
|
|
|
|
PC | X | X | X | X | X |
HDMI | X | X | X | X | △ |
○: <Preview> enabled.
△: <Twin Display> enabled. X : Disabled.
✎✎The Touch Control screen will freeze a few seconds while the input source of the TV switches.
✎✎A message appears saying “Not Supported Mode” if the network condition is poor. Check the network connection and try again.
✎✎<Twin Display> or <Preview> may be restricted on the touch control if one of the following functions or modes is enabled on the TV:
––Media Play, Internet@TV, AllShare, or PC mode.