The problem
Try this!
| Check whether the device supports Anynet+. | ||
| Check whether the HDMI cable is properly connected. | ||
| Go to Anynet+ | Settings General External Device Manager | |
The connected device is | Anynet+ | ||
Scan for Anynet+ devices again. |
| ||
not displayed. |
| ||
Anynet+ devices must be connected to the TV using an HDMI cable. Make sure the device is | |||
| |||
| connected to your TV with an HDMI cable. Some HDMI cables may not support Anynet+. | ||
| If the connection is terminated because there has been a power failure or the HDMI cable has | ||
| been disconnected, please scan for the device again. | ||
|
| ||
The TV audio is not being | Connect an optical cable to the TV and the receiver. | ||
ARC enables the TV to output digital sound via the HDMI (ARC) port. | |||
played through the | |||
However, ARC is only available when the TV is connected to an audio receiver that supports | |||
receiver. | |||
ARC. |
| ||
|
| ||
|
|
|
- 94 -