Tuning analogue channels
Settings 
Broadcasting 
Expert Settings 
Manual Tuning 
Analogue Channel Tuning
Select New and configure Programme, Colour System, Sound System, Channel, and Search to scan for analogue channels. Then, select Store to store the scanned channels in the TV.
"" This function is only available for analogue broadcasts.
Channel mode
●● P (programme mode)
When tuning is complete, the broadcasting stations in your area have been assigned to position numbers from P0 to P99. You can select a channel by entering the position number in this mode.
●● C (aerial channel mode) / S (cable channel mode)
These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel.
Fine-tuning analogue broadcasts
Settings 
Broadcasting 
Expert Settings 
Fine Tune
"" This function is only available for analogue broadcasts.
Setting satellite system
Settings 
Broadcasting 
Expert Settings 
Satellite System
You can configure a set of satellite dish settings before performing a channel scan.
"" This function is only available on certain models in specific geographical areas.
- 66 -