Adjust sill | Therma-Tru Pre-hung Door Systems specs

Unclip and open door.

Install hardware.

Complete jamb fastening.

Remove transport clip. Open and close door to ensure smooth operation.

Remove small margin shims, located on the head and lock jambs, between door and jambs.

With door open, at hinges drill 1/8” dia. Pilot holes and fasten #10 x 2-1/2” screws (provided) through hinges to anchor door frame and prevent sagging.

Close door. Carefully shim between jamb and opening behind latch area. Open door and install lockset hardware.

Retire el sujetador para transporte

y abra la puerta. Instale los aditamentos. Termine de fijar el marco de puerta.

	Retire el sujetador para trans-
	porte. Abra y cierre la puerta
	para asegurarse
	`
	de que este
	funcionando
	bien.
`	~
Retire las calzas de los margenes pequenos,
que se encuentran en la parte superior del
marco y de la cerradura.
	Con la puerta
	abierta, en las
	~
	bisagras senaladas, perfore
	`
	agujeros de guia de 1/8” de
	`
	diametro e inserte los tornillos
		`
	#10 x 2-1/2” (incluidos) a traves de
	las bisagras para anclar el marco y
	evitar que se afloje.

Cierre la puerta. Coloque cuidadosamente calzas entre la jamba

y la abertura detras del area del pestillo. Abra la puerta e
`	`
instale los aditamentos de la cerradura.
		Perfore agujeros de quia de 1/8”
		Perfore agujeros de quia de 1/8”
			`
		diametro e inserte dos tornillos
	`

Shims

Drill 1/8” dia. Pilot holes and place (2) #8 x 2-1/2” screws (provided) through strike mount- ing holes to secure lock jamb center and provide security. Adjust strike in or out for proper door operation and tighten screws.

#8 x 2-1/2” (incluidos) a traves

de las perforaciones para montar

la hembra de la cerradura de

manera que se fije el centro de la

jamba de la cerradura y se obten-

ga una mayor seguridad. Ajuste

la hembra de la cerradura hacia adentro o hacia adentro o hacia afuera para que opere bien la puerta y termine de insertar los tornillos.

Adjust sill.

Adjust sill - Your door system may have an adjustable threshold cap. When properly adjusted, it should be snug and difficult to pull a dollar bill from under the door when it is closed, but the bill can be removed without tearing.

This check should be performed a
each adjustment screw location.	Dollar
	1
Note:

After adjusting the threshold cap, ensure that the weather strip is flush with the top of the cap. Trim as neccessary.

Ancle el umbral, ajuste el umbral. (Algunos umbrales)

Pre-hung Door Systems specifications

Therma-Tru Pre-hung Door Systems have established themselves as a popular choice among homeowners and builders alike, known for their quality, durability, and aesthetic appeal. These door systems are factory-prepped for easy installation, ensuring that both first-time homeowners and seasoned builders can achieve professional results with minimal effort.

One of the main features of Therma-Tru Pre-hung Door Systems is their energy efficiency. These doors are designed to minimize heat transfer, which leads to energy savings and improved interior comfort. The use of advanced insulation materials and the option for double or triple glazing in glass door models further enhance their energy performance, contributing to lower heating and cooling costs.

In terms of design flexibility, Therma-Tru offers a wide range of styles, colors, and finishes, catering to diverse architectural tastes. Whether you prefer the classic look of a traditional wooden door or the sleek appearance of fiberglass, there are options available. Additionally, customization possibilities include decorative glass inserts, sidelites, and transoms, allowing homeowners to create a unique entryway that complements their home’s exterior.

Durability is another hallmark of Therma-Tru Pre-hung Door Systems. Built with high-quality materials, these doors resist warping, rusting, and other forms of wear. The fiberglass models, in particular, are engineered to withstand harsh weather conditions while maintaining their appearance and functionality over time. This resilience makes them an ideal choice for those living in diverse climates.

A notable technology employed by Therma-Tru is the use of advanced sealing systems. These systems include weather stripping and door sweeps that provide optimal sealing against air and water infiltration. This not only enhances energy efficiency but also ensures that the doors perform reliably in inclement weather, resisting moisture and drafts.

Therma-Tru also places a strong emphasis on security. Many of their pre-hung door systems feature multi-point locking mechanisms, which enhance the security of your home. This added feature is crucial for safeguarding against unauthorized entry, providing peace of mind for homeowners.

In summary, Therma-Tru Pre-hung Door Systems stand out for their energy efficiency, design versatility, durability, advanced sealing technologies, and enhanced security features. With a commitment to quality and innovation, Therma-Tru continues to be a leader in the door industry, making their pre-hung door systems a smart choice for any home renovation or construction project.