Samsung AR18JQFNEWKNMG manual Choosing the installation location, Installing the unit, Indoor unit

Page 33

Installing the unit

IMPORTANT: When installing the unit, always remember to connect first the refrigerant tubes, then the electrical lines. Always disassemble the electric lines before the refrigerant tubes.

Upon receipt, inspect the product to verify that it has not been damaged during transport.

If the product appears damaged, DO NOT INSTALL it and immediately report the damage to the carrier or retailer (if the installer or the authorized technician has collected the material from the retailer.)

After completing the installation, always carry out a functional test and provide the instructions on how to operate the air conditioner to the user.

Do not use the air conditioner in environments with hazardous substances or close to equipment that release free flames to avoid the occurrence of fires, explosions or injuries.

To help prevent injury when accidentally touching the indoor unit fan, install the indoor unit at least 2.5 m above the floor.

The air conditioner should be used only for the applications for which it has been designed : the indoor unit is not suitable to be installed in areas used for laundry.

Our units must be installed in compliance with the spaces indicated in the installation manual to ensure either accessibility from both sides or ability to perform routine maintenance and repairs. The units’components must be accessible and that can be disassembled in conditions of complete safety either for people or things.

For this reason, where it is not observed as indicated into the Installation Manual, the cost necessary to reach and repair the unit (in safety, as required by current regulations in force) with slings, trucks, scaffolding or any other means of elevation won’t be considered in-warranty and charged to end user.

Power supply line, fuse or circuit breaker

Always make sure that the power supply is compliant with current safety standards. Always install the air conditioner in compliance with current local safety standards.

Always verify that a suitable grounding connection is available.

Verify that the voltage and frequency of the power supply comply with the specifications and that the installed power is sufficient to ensure the operation of any other domestic appliance connected to the same electric lines.

Always verify that the cut-off and protection switches are suitably dimensioned.

Verify that the air conditioner is connected to the power supply in accordance with the instructions provided in the wiring diagram included in the manual.

Always verify that electric connections (cable entry, section of leads, protections…) are compliant with the electric specifications and with the instructions provided in the wiring scheme.

Always verify that all connections comply with the standards applicable to the installation of air conditioners.

Choosing the installation location

Indoor unit

For Wi-Fi Air-conditioner installation, select indoor unit location near to wireless router.

In case Wi-Fi signal strength weakened , Smart APP may be disconnected depending on the Wi-Fi signal strength.

Where airflow is not blocked.

Where cool air can be distributed throughout the room.

Install the refrigerant piping length and the height difference of both indoor and outdoor units as indicated in the installation diagram.

Wall that prevents vibration and is strong enough to hold the product weight.

Out of the direct sunlight .

1 m or more away from the TV or radio (to prevent the screen from being distorted or noise from being generated).

As far away as possible from the fluorescent and incandescent lights (so that the remote controller can be operated well).

A place where the air filter can be replaced easily.

Don't install directly above electronics equipment as leaking water may cause damage if not serviced. (eg. Computers, TV, etc).

English-33

07stIn llan atio

MG_GOOD_R-410A_A3050_IB&IM_EN_DB68-05188A-00_UX.indd 33

2/17/2015 2:13:57 PM

Image 33
Contents Air Conditioner Features of your new air conditioner Contents English-4 Safety precautions01epPr aration English-5English-6 For UsingEnglish-7 English-8 Do not place objects or devices under the indoor unitEnglish-9 For CleaningChecking before use Operation rangesEnglish-10 English-11 Technical SpecificationsAR24JRFNCWK/MG English-12Main parts Checking the name of the partsDisplay English-13Checking the remote controller Remote controller buttonsEnglish-14 Low Battery warning Remote controller displayStoring the remote controller Inserting the batteriesBasic function Press the button to adjust the temperature Press the button to set the desired fan speedEnglish-17 Vertical air flow Adjusting the air flow directionHorizontal air flow English-18Setting the On timer Setting the On/Off timerYou can adjust the fan speed in Cool/Fan/Heat ARJQ mode English-19Setting the Off timer English-20Button Additional options available in mode ModeEnglish-21 English-22 Step cooling functionUsing the Comfort function Using the Fast functionEnglish-23 Press the Options buttonUsing the Single User function English-24Press the Single user button Using the Auto Clean function Setting the Beep soundEnglish-25 Cleaning the indoor unit Cleaning the air conditionerSuch as thinner, kerosene and acetone etc. to clean Cleaning the outdoor unit heat exchangerRemoving the Air filter Cleaning the air filterEnglish-27 Remove the air filter from the main bodyReassembling the Air filter English-28Top of the Air filter into the main body.. ➀ English-29 Maintaining the air conditionerAir conditioner TroubleshootingEnglish-30 Take the cover off and takeCheck the Drains have been cleared Regular Maintenance Button or disconnect the power plug/switchError is indicated Heard when refrigerant flow movement changes. It is normalEnglish-32 General informationInstalling the unit Choosing the installation locationPower supply line, fuse or circuit breaker Indoor unitWhere sulfide gas exists Outdoor UnitEnglish-34 When installing more than 1 outdoor unit English-35Top view Side view Accessories in the indoor unit case AccessoriesAccessories in the outdoor unit case English-36Optional accessories Fixing the installation plateTools required for installation General Tools Tools for test operationsEnglish-38 Assembling the hanger screwRemoving the screws This QR code for detail video of indoor unit installationRemoving the Cover panel Before mounting the indoor unit English-39English-40 Assembling the Cover panel After mounting the indoor unitCable specification Connecting the assembly cableConnecting the cable English-41Extend the assembly cable if necessary Each wire is labeled with the corresponding terminal numberEnglish-42 Smooth the cut edges English-43Cut off the remaining foam insulation TorqueEvacuating the indoor unit Cutting or extending the pipeEnglish-44 English-45 English-46 Drain hose installationChanging direction of the drain hose English-47Check for leakage on both side of the drain outlet English-48 Evacuating the connected pipesConnect a drain hose to the drain plug Drain hole Drain plugEnglish-49 Adding RefrigerantIf you use a pipe longer than 4 m24JFB or If you use a pipe shorter than 4 m24JFB orCylinder with siphon English-50English-51 Performing the gas leak testsOuter Tightening torque 07stIn llan atio To check for gas leaks on the outdoor unitOutdoor unit installed on the wall by rack Fixing the outdoor unit in placeEnglish-52 English-53 Smart Install modeOff / Blinking / On English-54English-55 Final check and trial operationEnglish-56 Packing and unpacking guideHow to connect your extended power cables English-57Atio English-58 English-59 021-8255 CE English-60

AR18JQFSBWK/MG, AR12JRFNBWK/MG, AR24JRFNCWKXMG, AR24JRFNCWKNMG, AR24JRFNCWK/MG specifications

Samsung has consistently been a pioneer in the field of air conditioning technology, and their latest models, including the AR18JRFNEWKXMG, AR18JQFNEWKXMG, AR18JRFNEWKNMG, AR18JQSDBWK/MG, and AR24JQFNCWK/MG, exemplify this commitment to innovation and performance. Each of these units is equipped with advanced features designed to enhance comfort and efficiency in any setting.

One of the prominent characteristics of these models is the Digital Inverter technology. By adjusting the compressor's speed based on the cooling demand, this feature significantly reduces energy consumption compared to traditional models, leading to lower electricity bills while maintaining optimal room temperature. This energy efficiency is further bolstered by the units’ high Seasonal Energy Efficiency Ratio (SEER) ratings, ensuring that they operate smoothly even in extreme temperature conditions.

In addition to energy efficiency, these Samsung air conditioners are designed for convenience and ease of use. They come with a Smart Wi-Fi feature, allowing users to control their AC units remotely via a smartphone app. This capability not only provides comfort but also adds to the user-friendly experience by enabling programmable schedules and real-time monitoring of energy consumption.

Another noteworthy feature is the Air Purification System. Equipped with a triple filter system, including a PM 1.0 filter, these units capture and eliminate dust, allergens, and harmful particles from the air, resulting in improved indoor air quality. This is particularly beneficial for individuals with allergies or respiratory conditions.

Noise reduction is another area where these models shine. With near-silent operation, users can enjoy a peaceful environment without the disturbing sounds often associated with traditional air conditioning units. This is complemented by the sleek and modern design, which seamlessly fits into various home décors.

All of these features come together to create air conditioning solutions that not only provide exceptional cooling performance but also contribute to a sustainable lifestyle. Samsung’s dedication to customer-centric design and cutting-edge technology makes these models an excellent choice for anyone seeking reliable and efficient climate control solutions in their homes or offices.