86 | 3 System upgrade |
Installing and removing the ARMC/3 R2 module
The optional ARMC/3 R2 module provides server management firmware and functionality for the system.
To install the ARMC/3 R2 module:
1Perform the
2Remove the I/O expansion module. Perform instructions described in “To remove the I/O expansion module” section on page 85.
3Set the I/O expansion module on a static controlled surface with components facing up.
4Record the MAC address on the ARMC/3 R2 module.
5Peel off the backing from the EMI gasket (A).
6Adhere the gasket to the I/O expansion module where the ARMC/3 R2 NIC module will contact the I/O expansion module (B).
B 
A
AF002284
