39

Installation precautions

Before you install any server component, we recommend that you read the following sections. These sections contain important ESD precautions along with pre-installation and post-installation instructions.

ESD precautions

Electrostatic discharge (ESD) can damage the processor, disk drives, expansion boards, motherboard, memory modules and other server components. Always observe the following precautions before you install a server component.

Do not remove a component from its protective packaging until you are ready to install it.

Do not touch the component pins, leads, or circuitry.

Components with a Printed Circuit Board (PCB) assembly should always be laid with the assembly-side down.

Wear a wrist grounding strap and attach it to a metal part of the server before handling components. If a wrist strap is not available, maintain contact with the server throughout any procedure requiring ESD protection.

Keep the work area free of nonconductive materials, such as ordinary plastic assembly aids and foam packing.

Page 57
Image 57
Acer R920 Series manual Installation precautions, ESD precautions