141
Server boot does not complete POST.
Do the following:
•Make sure the processor is properly seated.
•Check the BIOS release notes to ensure the BIOS installed on the platform supports the stepping and the family of processors currently installed.
•Make sure the memory boards are populated according to system requirements.
Server does not recognize all of the processors installed.
•Make sure the processor is properly seated.
HDD activity indicator does not light.
Do the following:
•Make sure the drive is not disabled in the system BIOS.
•Make sure the drive’s power and data cables are connected correctly.
•Make sure the drive is compatible.
•Make sure you have not exceeded the power budget for the server.
•If using a RAID configuration with SAS drives, make sure the server RAID adapter is installed correctly.
If you have installed one or more hard drives in the system, do the following:
•Make sure the power and signal cables are connected correctly.
ODD (Optical disk drive) activity indicator does not light.
Do the following:
•Make sure the power and signal cables are properly installed.
•Check that relevant switches and jumpers on the drive are set correctly.