65

7 Observe the post-installation instructions described on page 40.

To install the DVD drive:

1Perform the pre-installation instructions described on page 39.

2If necessary, remove the old DVD drive. See previous section.

3Remove the new drive from its protective packaging.

4Attach the SATA-to-IDE converter board to the new media device

(A).

5Install the media device into the carrier (B).

6Slide the carrier into the front opening in the chassis (C).

7Plug the SATA and power cables into the converter board (D).

8 Observe the post-installation instructions described on page 40.

Page 83
Image 83
Acer R920 Series manual To install the DVD drive