Samsung AR24JRFSBWKNMG, AR24JRFNBWKNMG Mode, English-21, Additional options available in mode

Page 21

mode

For a comfortable sleep, the air conditioner will operate in 3 stages in order of Fall asleep Sound sleep Wake up stage.. When the air conditioner is operating in Cool/Heat (ARJQ) mode;

1. Press the Timer button to select (

)..

 

 

 

-- (

) indicator will keep blinking and you can set the time..

 

 

2. Press the

button to set the time..

 

 

 

-- You can set the time in half hour unit from 30 minutes (0..5 on the display) ~

3 hours and hour unit from 3~12 hours..

 

 

 

-- Time can be set from minimum 30 minutes to maximum 12 hours..

 

-- Default time setting for the

 

mode is 8 hours..

 

 

3. Press the SET button to complete the

mode setting..

 

-- (

) indicator and the set time of the

mode will be displayed on

the remote controller display..

 

 

 

 

-- Timer indicator (

) will be displayed on the indoor unit display..

 

--

mode setting will be cancelled if you don't press the SET button within

10 seconds after setting the time.. Therefore, check for the (

) indicator on the

remote controller display and the Timer indicator ( ) on the indoor unit display..

Cancel

ffPress the Timer button select (

) press the

or

button

 

set the timer to

press the SET button..

 

 

Remote controller display

Additional options available inmode

You can adjust the set temperature by 1 °C within the range of 16 °C~30 °C.

Fan speed will be adjusted automatically according to themode.

However, If you selectmode while heating operation is on, you can adjust fan speed.

When themode is on.

In Cool mode: Air flow direction will be adjusted automatically.

In Heat (ARJQ) mode: Adjusting air flow direction is available.

Temperature and fan speed change inmode

•• Fall asleep: Eases you into sleep by dropping the temperature..

•• Sound sleep: Relaxes your body and raises your temperature slightly..

•• Wake up: Allows you to wake up from comfortable intermittent air and it makes you feel refreshed..

Recommended set temperature is between 25 °C ~ 27 °C for cooling and 21 ˚C~23 ˚C for heating.

• If the set temperature is too low, you may feel cold during sleep or catch a cold..

Optimal operation hour of mode is 8 hours.. Therefore, if the time is set too short or long, you may not feel as comfortable as you would expect..

If the mode is set over 5 hours, Wake up stage will begin when 1 hour is remaining in the operation time and the air conditioner will stop automatically..

When the On timer and the function is set simultaneously, the air conditioner will only apply the function that was set later..

R03 TIME

English-21

MG_GOOD_R-410A_A3050_IB&IM_EN_DB68-05188A-00_UX.indd 21

2/17/2015 2:13:37 PM

Image 21
Contents Air Conditioner Features of your new air conditioner Contents English-4 Safety precautions01epPr aration English-5English-6 For UsingEnglish-7 English-8 Do not place objects or devices under the indoor unitEnglish-9 For CleaningChecking before use Operation rangesEnglish-10 English-11 Technical SpecificationsAR24JRFNCWK/MG English-12Main parts Checking the name of the partsDisplay English-13Checking the remote controller Remote controller buttonsEnglish-14 Low Battery warning Remote controller displayStoring the remote controller Inserting the batteriesBasic function Press the button to adjust the temperature Press the button to set the desired fan speedEnglish-17 Vertical air flow Adjusting the air flow directionHorizontal air flow English-18Setting the On timer Setting the On/Off timerYou can adjust the fan speed in Cool/Fan/Heat ARJQ mode English-19Setting the Off timer English-20Button Additional options available in mode ModeEnglish-21 English-22 Step cooling functionUsing the Comfort function Using the Fast functionEnglish-23 Press the Options buttonUsing the Single User function English-24Press the Single user button Using the Auto Clean function Setting the Beep soundEnglish-25 Cleaning the indoor unit Cleaning the air conditionerSuch as thinner, kerosene and acetone etc. to clean Cleaning the outdoor unit heat exchangerRemoving the Air filter Cleaning the air filterEnglish-27 Remove the air filter from the main bodyReassembling the Air filter English-28Top of the Air filter into the main body.. ➀ English-29 Maintaining the air conditionerAir conditioner TroubleshootingEnglish-30 Take the cover off and takeCheck the Drains have been cleared Regular Maintenance Button or disconnect the power plug/switchError is indicated Heard when refrigerant flow movement changes. It is normalEnglish-32 General informationInstalling the unit Choosing the installation locationPower supply line, fuse or circuit breaker Indoor unitWhere sulfide gas exists Outdoor UnitEnglish-34 When installing more than 1 outdoor unit English-35Top view Side view Accessories in the indoor unit case AccessoriesAccessories in the outdoor unit case English-36Optional accessories Fixing the installation plateTools required for installation General Tools Tools for test operationsEnglish-38 Assembling the hanger screwRemoving the screws This QR code for detail video of indoor unit installationRemoving the Cover panel Before mounting the indoor unit English-39English-40 Assembling the Cover panel After mounting the indoor unitCable specification Connecting the assembly cableConnecting the cable English-41Extend the assembly cable if necessary Each wire is labeled with the corresponding terminal numberEnglish-42 Smooth the cut edges English-43Cut off the remaining foam insulation TorqueEvacuating the indoor unit Cutting or extending the pipeEnglish-44 English-45 English-46 Drain hose installationChanging direction of the drain hose English-47Check for leakage on both side of the drain outlet English-48 Evacuating the connected pipesConnect a drain hose to the drain plug Drain hole Drain plugEnglish-49 Adding RefrigerantIf you use a pipe longer than 4 m24JFB or If you use a pipe shorter than 4 m24JFB orCylinder with siphon English-50English-51 Performing the gas leak testsOuter Tightening torque 07stIn llan atio To check for gas leaks on the outdoor unitOutdoor unit installed on the wall by rack Fixing the outdoor unit in placeEnglish-52 English-53 Smart Install modeOff / Blinking / On English-54English-55 Final check and trial operationEnglish-56 Packing and unpacking guideHow to connect your extended power cables English-57Atio 021-8255 CE English-60

AR24JRFNBWKNMG, AR24JRFSBWKNMG specifications

Samsung is renowned for its innovation and quality in the electronics industry, and the AR24JRFSBWKNMG and AR24JRFNBWKNMG air conditioners exemplify this commitment. Designed for efficiency and comfort, these models are ideal for residential and commercial spaces, providing optimal climate control.

One of the standout features of both models is the inverter technology. This technology allows the air conditioners to adjust their cooling output based on the temperature of the room, ensuring energy efficiency and consistent comfort. By running the compressor at varying speeds, these units minimize energy consumption while maintaining the desired indoor environment.

The AR24JRFSBWKNMG and AR24JRFNBWKNMG also incorporate a robust air filtration system. Equipped with a multi-stage filter, these units effectively capture dust, allergens, and other airborne particles, improving indoor air quality. This is particularly beneficial for allergy sufferers or those living in urban areas with high levels of pollution.

Noise levels are another critical consideration for any air conditioning system. Both models operate quietly, thanks to their advanced design and technology. The noise reduction features ensure that the air conditioners can function without disrupting your peace, making them suitable for bedrooms, living rooms, and office spaces.

Additionally, Samsung has prioritized user convenience with smart features. The air conditioners can be controlled remotely via a smartphone app, allowing users to adjust settings from anywhere. This smart capability ensures that your space is at the perfect temperature upon arrival, maximizing comfort and ease.

Energy efficiency is further complemented by the inclusion of a high-efficiency compressor, which contributes to lower electricity bills. The models have received a high Energy Efficiency Ratio (EER) rating, making them not only eco-friendly but also cost-effective.

Moreover, both air conditioners come with a sleek and modern design, seamlessly blending into a variety of interior styles. The compact size is ideal for space-saving installations, enhancing the aesthetic appeal of any room.

In summary, the Samsung AR24JRFSBWKNMG and AR24JRFNBWKNMG air conditioners provide a combination of advanced technology, energy efficiency, and aesthetic design. With features such as inverter technology, smart controls, and exceptional air filtration, these units cater to the needs of modern consumers seeking comfort and reliability in their climate control solutions.