Samsung AX40H6500WQ/MG manual Problem Solution

Page 25

Troubleshooting

Problem					Solution
	•	Check if the hydrulic turbin fits correctly. When putting the turbin into the appliance, the side
		with toothed wheel should look forward.
	• Check if it is electrical noise. The electrical noise may be generated during the ion production.
		Therefore, do not worry about malfunction with this noise.
Strange noise is generated.	• Check if it is mechanical noise. Check if the hydraulic turbine and tray are dirty with white
		powder. Purchase a new water purification filter and replace it. Clean the humidification
		hydraulic turbine and tray on a regular basis. Especially, when there is white powder around the
		groove of the humidification hydraulic turbine gear part, clean it with a soft brush as the white
		powder causes a noise.
	• If you are using the humidification function, water in the tank may cause the sound. Do not
		worry, there is no problem with the product.
Tray is not aligned properly	• Remove the tray and make sure that humidification hydraulic turbine is properly inserted
		to the groove on the tray. Then put the tray back to its position. (Refer to the‘Cleaning and
after reassembling it.
		maintenance’ section.)

Error is indicated.	•				messagess are displayed on the timer diplay of the control panel. In this case, the

		appliance has a certain problem, so contact the service center.

24

ACR PAPER-AR_IB_05556A-00_EN.indd 24

2015-07-01 오전 10:18:15

Image 25

Contents Samsung 800 726 Questions or COMMENTS?Function High-class design FfClean humidificationFfFuture multipurpose electric appliance FfMoisturizing effect by natural humidificationSafety precautions ContentsWhen repairing is needed, contact a service center Do not pull the power cord, when unplugging the applianceThere should be over 15cm space around the appliance Do not unplug the appliance during operationDo not strike or pull the appliance with excessive force Do not touch the power plug with wet handsLeave more than 15cm space between the product and the wall Do not use a damaged water bottleCheck the power plug and socket Checking installationCheck before use Design information Product informationProduct specification Using a filterDisplaying current humidity Water supplySupplied with enough water Open the water bottle capAir purifier with humidification function Check the name of the componentsOutput of the humidity or air flow Sucks in the outdoor airPurification display Buttons on the control panelHumidification and purification mode Operation modePurification mode Low  Medium  Strong When S-Plasma ion function is on Sleep modePlasma ion Time and set humidity by pressingCleaning the exterior Cleaning and maintenanceMaintaining the appliance Moving the applianceDust sensor ① cover Cleaning dust sensorPort Cleaning the water bottleWater bottle cap Water purification filter Upper cover Water bottleCleaning the water purification filter Cleaning the humidification filter Side cover TrayDo not clean the surface of the tray with anything sharp Cleaning the tray and the interior of the applianceUpper cover Pre filter Cleaning the pre filterHepa filter Changing the Integrated HEPA/Deodorization FilterUpper cover Filter frame Troubleshooting Problem Solution Memo

Related manuals

Manual 26 pages 48.31 Kb