Samsung AX40H6500WQ/MG Operation mode, Humidification and purification mode, Purification mode

Operation mode

You can select humidification and purification mode or purification mode only.

Humidification and purification mode

ffOperates the humidification mode that adjusts indoor humidity and purification mode, providing clean air at the same

time.
ffThe [	] light will be on on the control panel and the desired humidity can be adjusted.

Purification mode

ffYou can operate purification mode only in the summer or high humidity condition.

ff[		] light on the control panel will go out and desired humidity cannot be adjusted.
		• When the humidification function is not in use, detaching the hydraulic turbine before using the appliance is
	NOTE		recommended. (Refer to p.10)
		• When you only use the purification mode without using the humidification function, get rid of all the water
			within the tray and the water bottle, wash the humidification filter, and make sure to dry them all before using
			the product.
		• Unpleasant smell may occur if the humidification hydraulic turbine is not being used while it is wet. Keep the
			humidification hydraulic turbine after cleaning it thoroughly. (Refer to page 20.)
1.	Press [		] button to start the humidification and purification mode.
	-- The air purifier with humidification function will be turned on with sound.
	-- When plugging the appliance in and turning it on, it will start as humidification and
		purification mode(Fan speed: [ ](Low)).
	-- When turning the appliance on again, the mode you set before turning the appliance off will
		remain.
	-- When the fan speed is auto, desired humidity cannot be adjusted.
2.	Press [		] button to adjust the desired humidity in humidification and purification mode.

-- When pressing the button once time, current humidity will be displayed and each time you press the button, the desired humidity will be increased by 5%. You can set the humidity range from 30 to 70%.

-- You can select either humidification and purification mode or purification mode only

by adjusting humidity level. When the desired humidity is 70%, press [		] button one
more time to turn off the [	] light and to stop the humidification mode and to start the
purification mode.

-- When the fan speed is Auto, the proper humidification and purification status will be maintained depending on the ambient temperature, humidity, dust, and odor.

-- When the [		] light is not lit up, the humidification function does not operate.
-- If the [	(Water supply display)] icon blinks during humidification and purification mode,

the mode will be stopped.

3. Press [ ] button to adjust fan speed.

--		(Low) 	(Medium) 	(Strong) 		(Auto) 	(Sleep) will be selected in
	rotation.
-- When the fan speed is Auto, the proper humidification and purification status will be
	maintained depending on the ambient temperature, humidity, dust, and odor.
-- When selecting sleep mode, only the [					(Sleep display)] display on the control panel will
	be dimmed.
-- Fan speed will be changed to (Sleep) during humidification and purification mode.								<Auto setting status>

12

ACR PAPER-AR_IB_05556A-00_EN.indd 12 2015-07-01 오전 10:18:07