Cleaning and maintenance
Cleaning the tray and the interior of the appliance
If the appliance is not cleaned for a long time, sediment (powder) can form so clean the appliance frequently.
1. While the appliance is switched off, detach the upper cover(①) and lift off the water bottle from water bottle box(②).
① | Upper cover |
| |
② | Water bottle |
|
2.Detach the side cover from the appliance by gripping and pulling out (③) the tray handle on bottom right of the appliance and then lift up (④) the humidification hydraulic turbin in the arrow direction. Be careful not to drop water from the humidification hydraulic turbin.
3.If white powder has formed on the surface of the humidification hydraulic turbine or around the groove of the gear part, noise may be generated. Therefore, clean those parts with a soft brush.
4.After removing the water in the tray, dry the tray, side cover and interior of the appliance with dry towel.
-- Do not clean the surface of the tray with anything sharp.
5.Put the humidification hydraulic turbin into the tray. When putting the turbin into the tray, the side that 'Back' is written should look at the rear side of the product.
6.After closing the side cover(①), put the water bottle into the water bottle box(②) and close the upper cover.(③)
Humidification hydraulic turbine
④
③
Tray 
Handle
Humidificatin hydraulic
turbineShaft
Groove
Tray
③Upper cover
Water bottle |
② |
① |
Side cover |
• When the upper cover is not closed correctly after cleaning, the appliance will not operate correctly.
NOTE • Clean the tray and interior of the appliance more than once a week. However, if those parts have a bad odor or become dirty, clean them more frequently.
20
ACR |