Samsung MT1066SE/ZAM manual Checking Parts, Warranty and Service Information, Setting Up

Your New Toast & Bake Microwave oven

Checking Parts

Unpack your oven and check to make sure that you have all the parts shown here. If any part is missing or broken, call your dealer.

glass tray	roller guide ring
oven	Instruction manual
metal wire rack	crumb tray
	(DE97-00327A)
(DE97-00318B)
registration card

Note :

The white plastic tubing on the crumb tray and wire rack must not be removed.

Warranty and Service Information

To help us better serve you, please complete the enclosed registration card and promptly return it by mail. If the registration card is missing. you can call united Matbouli group at 800-2-444-999 or register on line at www.samsungmea.com.When contacting Samsung, please provide the specific model and serial number information which is usually located on the back or bottom of the product. Please record these numbers below, along with the other requested information. Keep this information in a safe place as a permanent record of your purchase to aid in identifica- tion in case of theft or loss, and a copy of your sales receipt as a proof of purchase if warranty service is needed.

MODEL NUMBER	____________________
SERIAL NUMBER	____________________

DATE PURCHASED ____________________

PURCHASED FROM ____________________

Warranty service can only be performed by a Samsung Authorized Service Center. If you should require warranty service, provide the above information with a copy of your sales receipt to the Samsung Authorized Service Center. For service assistance and the location of the nearest service center please call 800-2-444-999 or go on line to umg.com.sa

Setting Up

1 Place the oven on a flat, sturdy surface and plug the cord into a grounded outlet. Once plugged in, the display on your oven will show::

START ENTER TIME HEAT MICRO

Kg g Oz Lbs QTY

Make sure there is adequate ventilation for your oven by leaving at least four inches of space behind, above, and to the sides of the oven.

2 Open the oven door by pulling the handle at the top of the door.

3 Wipe the inside of the oven with a damp cloth.

4 Place the pre-assembled ring in the indentation in the center of the oven.

5 Place the glass tray on top of the ring so that the three glass tabs in the center of the tray fit securely into the tabs on the floor of the oven.

5