The new channel’s picture will be frozen, and the character “F” will appear. Press the ENTER button again to exit this mode.
%If the picture on any other channel remains frozen, repeat item $)
^Press the FREEZE button to exit entirely from FREEZE mode.
The FREEZE button will not operate in the following cases:
•While using the SETUP Menu
•While displaying the Event List or Door Bell List
•While replaying events
6.When you want to watch on ZOOM Screen Mode
This mode is operated only while in LIVE/P.B. Mode Full Screen.
1)When the ZOOM button is pressed, a ZOOM AREA will appear in the center of the screen.
2)Move the ZOOM AREA to the target position by using the Rotary Wheel and the ENTER button.
3)Press the ZOOM button again to increase picture to double its original size.
4)Press it again to return to the original size.
ZOOM AREA and ZOOM Picture Movement
1)Press the ZOOM button and turn the Rotary Wheel to move the ZOOM AREA up and down over the picture.
2)Press the ENTER button and turn the Rotary Wheel to move the ZOOM AREA left and right over the picture.
3)Press the ENTER button again and turn the Rotary Wheel to move the ZOOM AREA up and down over the picture.
The ZOOM button will not operate in the following case:
•While using the SETUP Menu
•While Displaying he EVENT List or Door Bell List
•While Replaying events
•While operating in Sequence Mode
7.When you want to watch on PIP Screen Mode
You can watch a Picture in Picture screen in
When you press the PIP button for the first time, the sub screen on the PIP screen is a sequence screen. After that, when you enter into PIP mode again, the sub screen which is displayed in the same screen mode as when you exited the PIP mode previously.
Using PIP Screen
1)Press the PIP button in
2)When a fixed channel is displayed on the sub screen, each time you press ENTER it switches between the Main screen and the Sub screen.
3)Turn the Rotary Wheel to change the channel of the Main screen.
4)Press the SEQUENCE button to set the Sub screen as the sequence screen. Press the button again to fix the channel.
5)You can change the position of the sub screen by going to “PIP POSITION” under “2.CLOCK/DISPLAY SET” on the SETUP menu.
The PIP button will not operate in the following cases:
•While operating in P.B. or TRIPLEX mode
•While displaying a split screen
•While using the SETUP Menu
•While displaying the Event List or Door Bell List
•While replaying events
•While
•While operating in Sequence mode
•In case of no Video input signal
•When the input signal channel is in the
8.When you want to watch the VCR output
Change to PB FULL Mode by pressing the Live/P.B./TRIPLEX button. The “PB THROUGH” picture will appear if the ENTER button is pressed while in this mode. Press the”ENTER” button again to return to the previous PB picture.
Caution
This function is only available in PB FULL Display mode.
9.When you want to watch the Event Replay screen
1)When an Alarm/Motion signal is input
You can use the alarm function only when an Alarm Box is con- nected. When an alarm/motion signal is input, the word "EVENT" is displayed on the screen, and a warning buzzer sounds. When this occurs, if you press ENTER, up to 16 frames before and after the generated alarm/motion signal are replayed on the Event Replay window.
Press ENTER again to stop the event replay.
If alarm/motion signals are input on more than one channel, press ENTER to start the event replay for another channel when the current event replay finishes. When an event replay for all the channels on which an alarm/motion signal has occurred has fin- ished, press ENTER to exit Event Replay mode.
Alarm/Motion histories are recorded in the EVENT LIST.
2)When Channel Loss is detected
If the channel loss detection function detects a channel loss, the word "EVENT" is displayed on the screen and a warning buzzer sounds. When this occurs, press ENTER and up to 16 frames before the detected channel loss are replayed on the Event Replay window.
Press ENTER again to stop the event replay. If channel loss is detected on more than one channel, press ENTER to start event replay for the next channel when the current event replay finishes. When the event replay for all the channels on which channel loss has been detected finishes, press ENTER to exit the Event Replay mode. Channel loss histories are recorded in the EVENT LIST.
10.When you want to watch a Door Bell
screen
The Door Bell Function is only available with a door bell connec- tion. When the door bell is pressed, the current picture switches to the doorbell area monitoring picture, in full screen mode, along with an alarming beep. At this time, one Instant Picture is stored in the "DOOR BELL LIST". Up to 8 pictures can be stored in the "DOOR BELL LIST".