Names and Functions of Parts
Front Panel
A | B C- C | D | E | F |
G H I J K L M
A.Auto
Use this button to auto adjustment direct access.
B.Exit
Use this button to Exit the active menu or the OSD.
C.
(Adjust)
These buttons allow you to highlight and adjust items in the menu.
C-. MagicBright button
MagicBright is a new feature providing optimum viewing environment depending on the contents of the image you are watching. Currently three different modes are available: Text, Internet, and Entertain. Each mode has its own
D.Menu(Monitor)
Use this button to open the OSD and activate a highlighted menu item.
E.
(Power)
Turns the power on/off.
F. 
(Power indicator)
This light glows green during normal operation, and blinks green once as the monitor saves your adjustments.
G.TALK
Communicates with the doorbell in duplex mode.
H.VOLUME ▲/▼ Controls the volume level.
SOURCE
Pressing ▲ and ▼ buttons at the same time converts to DVR and signal input select.
I.Multi Switch (Left, Right, Up, Down, Enter) Use Left, Right, Up and Down buttons to move Zoom Area and Setup Menu, or change channels and other settings.
Use the Enter button to change PIP to full size or select a
J.Remote Control Sensor
Aim the remote control towards this spot on the Monitor.
K.MENU(MUX)
Display the Setup menu on the screen. Press it again to exit the Setup menu.
L.MULTISCREEN
Switches to the split screen view. Each press of this button changes to the 4, 8, and
M.LIVE/P.B./TRIPLEX
Changes the Display mode. Each press of this button switches between Live, P.B., and Triplex modes sequentially.