Washing a Load of Laundry
Overview of the control panel
1 | 2 | 3 | 4 | 5 | 6 | 12 | 7 | 8 | 9 | 10 | 11 |
1.Digital graphic display
Displays the remaining wash cycle time,all of washing information and error messages.
2.Air Wash selection button
Press the button repeatedly to cycle through the Deodorise and
When the Air Wash function is selected, other cycles can no longer be used.
Deodorise : Removes bad smells from the laundry
3.Silver Wash selection button(
)
Silver Nano water is supplied in washing as well as the last rinse, featuring
4.Pre-wash+ selection button
Press the button to select
5.Drying Time selection button
Drying course can last up to 190min. When selecting drying only, drying course will start after spinning . (The spinning time is about 15~17 min.) If you wish to go through from washing to drying, select the course you want by turning the course selection dial and then push the Drying Time button. For dry cycle, you can select the time only but you cannot select temperature and rotation speed. Because no hot air or moisture is drained during dry cycle, no moisture or condensation develops on the walls and ceiling of your washing room. (130min. →90min. → 60min. →30min.)
If the load doesn’t dry enough as you expected, please try additional drying for 30~90 minutes at your disposal.
6.Intensive selection button
When selected, the washing power increases. This function can be selected for the Cotton, Coloreds, Synthetics, Jeans, Heavy Soil, Mixed Load, and Calm Wash courses. Pressing this button toggles between On and Off.
7.Temperature selection button
Press the button repeatedly to cycle through the available water temperature options. (cold(0˚C), 30˚C, 40˚C, 60˚C and 95˚C)
The default temperature varies depending on the cycle. You can also choose a particular laundry temperature from the preset temperature options.
8.Rinse selection button
Press the rinse button to add rinse cycles. Maximum number of rinse cycles is five.