2.
3.
C |
Use a Philips screwdriver to loosen four screws on the adaptor.
Hold the adaptor and turn part (C) in the arrow direction to loosen it by 5 mm (*).
Installation
4.Insert the adaptor into the water tap, and tighten the screws while lifting up the adaptor.
5.Turn part (C) in the arrow direction to tighten it.
C |
6.
D |
While holding down part (D), connect the water hose to the adaptor. Then, release part (D). The hose fits into the adaptor with a clicking sound.
English 15