Samsung WA90J5730SS/YL manual Operations, Control panel

Operations

Operations

Control panel

	01				08	09	11
				02
	03	04	05	06	07	10
01	Display			Displays the remaining time of a cycle, or the information code when
				a problem occurs.
				Press this button to finish the			wash at a specified time.
02	Delay End			To cancel the Delay End settings, simply turn off the washing
				machine.
				You can set the Delay End time up to 19 hours.
03	Water Level			The water level is adjusted according to the cycle. However, you can
				change the level manually.
04	Wash			Press to start washing, or adjust the wash time between 6 and 30
				minutes.
05	Rinse			Press to run the rinse cycle, or change the rinse count up to 5.
06	Power Spin			Press to run the spin cycle, or change the spinning time in this
				sequence: 1-9 min (increase by 1 minute) > 15 min > 30 min.
				This button provides two options, and is available only when the
				washing machine is stopped or in Standby state.
07	Activ Dual			• Water Save (default): Select to reuse water in the tub that remains
				after using Water Jet. The water will be used for the main cycle.
	Wash
				• Drain: Select to drain water that remains after using Water Jet.
				When draining is complete, the washing machine switches to
				Water Save mode automatically. Then, you can choose a cycle.
08	Temperature			Press to select a temperature level from 3 choices: Cold > Cold/Hot >
				Hot.
09	Power			Press once to turn the machine on, or twice to turn it off.

26  English

WA5700JS(BEST)-03516E_EN_K_150212.indd 26

2015-02-12 ￿￿ 12:39:11