Samsung WA90J5730SS/YL manual Before you start, Basics

Before you start

Before you start

The basics

Prewash (Water Jet & Built-in sink)

CAUTION

•Do not abuse Water Jet. Excessive use of Water Jet increases water consumption.

•When running water to the tub, do that gently. Otherwise, water may overflow the tub.

Water Jet and Built-in sink help you hand- wash before the washing machine starts operation. Water Jet is available only when the door is open with the water level set to less than High. For prewashing, use the Built-in sink that is designed to facilitate the hand-wash.

1. With the door open, lower the Built-in sink, and put clothes to prewash on it.

2. Press Water Jet to supply water to the Built-in sink, and hand-wash.

3. When done, you can either reuse the water in the main cycle or simply drain.

• To reuse the water, run the water down to the tub manually.

• To drain the water, press Drain.

NOTE

• If you want to hand-wash while the machine is operating, press Start/Pause to stop operation, and then follow steps 1-3 above.

• If you open both the door and the Built- in sink, lower the Built-in sink manually for prewashing.

• For the first-time use, Water Jet supplies water to the detergent drawer for

1 second to extract air from the water hose. After the first use, Water Jet stops automatically after 5 minutes of water supply.

20  English

WA5700JS(BEST)-03516E_EN_K_150212.indd 20

2015-02-12 ￿￿ 12:39:10