Troubleshooting
Troubleshooting
Problem |
| Action | |
|
| ||
| • Fully open both water taps. | ||
| • Make sure the temperature selection is correct. | ||
| • Make sure the hoses are connected to the correct water taps. | ||
|
| Flush water lines. | |
| • Disconnect the hoses and clean the screens. The hose filter | ||
|
| screens may be clogged. | |
Fills with the wrong | • | While the washing machine fills, the water temperature may | |
| change as the automatic temperature control feature checks | ||
temperature water. |
| ||
| incoming water temperature. This is normal. | ||
|
| ||
| • | While the washing machine fills, you may notice just hot and/ | |
|
| or just cold water going through the dispenser when cold or | |
|
| warm temperatures are selected. | |
|
| This is a normal function of the automatic temperature | |
|
| control feature as the washing machine determines the water | |
|
| temperature. | |
|
| ||
| • Check the fuse or reset the circuit breaker. | ||
| • Make sure the electrical voltage is normal. | ||
| • Make sure the washing machine is plugged in. | ||
| • Make sure the drain hose is pointed downward. (Natural drain | ||
Does not drain and/ |
| models only) | |
• | Make sure the drain hose is not clogged. | ||
or spin. | |||
• | Make sure the drain hose is not kinked. | ||
| |||
| • Straighten the drain hose. If there is a drain restriction, call for | ||
|
| service. | |
| • Close the door, and press or tap Start/Pause. For your safety, | ||
|
| the washing machine will not spin unless the door is closed. | |
|
| ||
| • Use the High or Extra High spin speed. (Applicable model | ||
Load is wet at the end |
| only) | |
• | Use high efficiency (HE) detergent to reduce oversudsing. | ||
of the cycle. | |||
• | Load is too small. Small loads (one or two items) may become | ||
| |||
|
| unbalanced and not spin completely. | |
|
|
| |
36 English