Troubleshooting
Troubleshooting
Information codes
If the washing machine fails to operate, you may see an information code on the display. Check the table below and try the suggestions.
Code |
| Action | |
|
| ||
| The WaterLevel sensor is not working properly. | ||
1C | • Check WaterLevel Sensor wire harness. | ||
• | If the information code remains, contact a customer service | ||
| |||
|
| centre. | |
|
| ||
| Motor problem | ||
3C | • | Try restarting the cycle. | |
| • If the problem continues, call for service. | ||
|
| ||
| Water is not supplied. | ||
| • Make sure the water taps are open. | ||
| • Make sure the water hoses are not clogged. | ||
| • Make sure the water taps are not frozen. | ||
4C | • | Make sure the washing machine is operating with sufficient | |
|
| water pressure. | |
| • Make sure that the cold water tap and the hot water tap are | ||
|
| properly connected. | |
| • Clean the mesh filter as it may be clogged. | ||
|
|
| |
| • | Make sure the cold water supply hose is firmly connected to | |
4C2 |
| the cold water tap. | |
| If it is connected to the hot water tap, the laundry may be | ||
|
| ||
|
| deformed with some cycles. | |
|
| ||
| Water is not draining. | ||
| • Make sure the drain hose is not frozen or clogged. | ||
| • Make sure the drain hose is positioned correctly, depending | ||
|
| on the connection type. | |
5C | • | Clean the debris filter as it may be clogged. | |
| • Make sure the drain hose is straightened all the way to the | ||
|
| drain system. | |
| • If the information code remains, contact a customer service | ||
|
| centre. | |
|
|
| |
38 English