Samsung HT-D350K/XV manual Hdmi Auto Detection Function, Using Anynet+HDMI-CEC

Connections

HDMI FUNCTION

HDMI Auto Detection Function

The product's video output will automatically change to HDMI mode when connecting an HDMI cable while power is on.

~HDMI (High Defi nition Multimedia Interface)

~HDMI is an interface that enables the digital transmission of video and audio data with just a single connector. Using HDMI, the product transmits a digital video and audio signal and displays a vivid picture on a TV having an HDMI input jack.

~HDMI connection description

-HDMI outputs only a pure digital signal to the TV.

-If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.

~What is the HDCP?

~HDCP (High-band width Digital Content Protection) is a system for protecting DVD content outputted via HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a display device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized copies from being made.

Using Anynet+(HDMI-CEC)

Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control. Anynet + can be used by connecting this product to a SAMSUNG TV using a HDMI Cable. This is only available with SAMSUNG TV's that support Anynet+.

1.Connect the product to a Samsung TV with an HDMI cable. (See page 15)

2.Set the Anynet+ function on your TV. (See the TV instruction manual for more information.)

✎NOTE

`The Anynet+ function supports some buttons of the remote control.

`This function is not available if an HDMI cable does not support CEC.

`Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user’s manual of your TV.

`Please check the logo (If your TV has an logo, then it supports Anynet+ function.)

1 English