Samsung HTDB1680TH/XSV Plug the power cord into, AC power supply, Selecting the Video Format

Page 11

Before Using Your DVD Player

Your DVD player is capable of playing DVD, VCD, CD, MP3 and JPEG discs.Depending on the disc you are using, these instructions may vary slightly. Read the instructions carefully before using.

1	Plug the power cord into the
	AC power supply.

4 Press TV/VIDEO button to select VIDEO mode.

2 Press the MODE button so that the TV indicator on the remote control flashes.

TV DVD RECEIVER

Press the MODE button so

5 that the DVD RECEIVER indicator on the remote control flashes.

TV DVD RECEIVER

3

6

Press the POWER button to turn on the TV.

Press DVD button to select DVD/CD mode.

CONNECTIONS

Selecting the Video Format

Turn off the main unit and then press NTSC/PAL.

•By default, the video format is set to "NTSC".

•Each time the button is pressed, the video format switches between "NTSC" and "PAL".

•Each country has a different video format standard.

•For normal playback, the video format of the disc must be the same as the video format of your TV.

To Operate the TV and DVD Player with a Single Remote Control

TV DVD RECEIVER

Press MODE button.

•Each time the Mode button is pressed, the TV indicator (red) and the DVD RECEIVER indicator (green) will flash alternately.

•You can operate the TV while the TV indicator is flashing and the DVD player while the DVD indicator is flashing.

•Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO, and Numeric (0-9) buttons.

•By default, the remote control is set to work with Samsung TVs.

See page 63 for more information on the operation of the remote control.

19

20

Image 11

Contents Digital Home Theater System Class 1 Laser Product Safety Warnings PrecautionsContents Copy Protection Playable DiscsFront Panel DescriptionBatteries, paying attention to the correct polarities + Insert Remote BatteriesConnecting the Speakers Component Video Best Quality Connecting the Video to TVComposite Video Good Quality Video Better QualityConnecting an External Analog Component Connecting an External Digital ComponentTerminal. Keep the AM loop antenna connected Temporary measureIs good, then fasten it to a wall or other rigid surface Connect the AM loop antenna supplied to the AMSelecting the Video Format Plug the power cord intoAC power supply Press Mode buttonCorresponding Direct Play 1, 2, 3, 4 Disc PlaybackPress Disc Skip button To select a specific disc, pressEach time the Remain button is pressed Displaying Disc InformationPress Info button Press the Remain buttonBriefly press Fast/Slow PlaybackSkipping Scenes/Songs Press and holdPress Enter Button at the end of the segment Repeat PlaybackPress Repeat button Press Info button twiceZoom Function Angle FunctionPress the numeric buttons 1Press Info buttonButtons to select the desired subtitle Press Menu button Using Disc MenuUsing the Title Menu Press Menu button to exit the setup screenPress Cursor Button to select Setting the LanguagePress Menu Button43PS Adjusting the TV Aspect Ratio Screen SizePress Menu button 43LBEnter the password Then press Enter button Setting Parental Controls Rating LevelPress Cursor button to Setting the PasswordPress OPEN/CLOSE Setting the Wallpaper Jpeg DVD VCDPress Return button to return to the previous level To Change the WallpaperTo end the test tone, press Test Tone button Setting the Speaker Mode Setting the Test TonePress Cursor Press Menu button Press Test Tone buttonPress Cursor , 5 to set the Delay Time Setting the Delay TimeTo move to ‘SOUND Setting the Audio QualityYou can adjust the balance and level for each speaker Press Sound Edit button and then press CursorSetting the DRC Dynamic Range Compression This function is available only for DVD/CD playback Auto Sound Calibration SetupPress ASC button Press Music button Live Surround ModeVirtual Headphone Function Press SUPER5.1Dolby Pro Logic II Effect Dolby Pro Logic II ModeListening to Radio Presetting StationsConvenient Functions Adjusting Display BrightnessTV Brand Code Number Press the Mode button on the remoteControl to make the TV indicator flash When operating the TV with the remote controlPicture quality is poor Before Calling for ServiceDisc is rotating but no Picture is producedSpecifications Memo