Samsung HTDB1680TH/XSV manual Setting the Delay Time, Press Cursor , 5 to set the Delay Time

Page 25

Setting the Delay Time

1 Press MENU button.

 

 

Press Cursor button

 

 

to move to ‘Audio’ and

 

2 then press ENTER

 

 

 

 

 

button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press Cursor button

3 to move to ‘DELAY TIME’ and then press ENTER button.

Press Cursor , ,

4 , buttons to move to the desired speaker and then press ENTER button.

Press Cursor , 5 to set the Delay

time

You can set the delay time for C between 00 and 05mSEC and for LS and RS between 00 and 15mSEC.

SETUP

Setting up the Speaker Delay Time

When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same. Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the sound of the Center and Surround Speakers.

47

Setting CENTER SPEAKER

If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms. Otherwise, change the setting according to the table.

Distance between Df and Dc

Delay Time

50

1.3 ms

100

2.6 ms

150

3.9 ms

2005.3 ms

Setting REAR (SURROUND) SPEAKERS

If the distance of Df is equal to the distance of Ds in the figure, set the mode as 0ms. Otherwise, change the setting according to the table.

Distance between Ds and Dc

Delay Time

200

5.3 ms

400

10.6 ms

600

15.9 ms

Ideal CENTER

SPEAKER placement

Ideal

SURROUND SPEAKER placement

It is desirable to place all speakers within this circle.

Df: The distance from FRONT SPEAKER

Dc: The distance from CENTER SPEAKER48

Ds: The distance from SURROUND SPEAKER

Image 25
Contents Digital Home Theater System Class 1 Laser Product Safety Warnings PrecautionsContents Copy Protection Playable DiscsFront Panel DescriptionBatteries, paying attention to the correct polarities + Insert Remote BatteriesConnecting the Speakers Composite Video Good Quality Connecting the Video to TVVideo Better Quality Component Video Best QualityConnecting an External Analog Component Connecting an External Digital ComponentIs good, then fasten it to a wall or other rigid surface Temporary measureConnect the AM loop antenna supplied to the AM Terminal. Keep the AM loop antenna connectedAC power supply Plug the power cord intoPress Mode button Selecting the Video FormatPress Disc Skip button Disc PlaybackTo select a specific disc, press Corresponding Direct Play 1, 2, 3, 4Press Info button Displaying Disc InformationPress the Remain button Each time the Remain button is pressedSkipping Scenes/Songs Fast/Slow PlaybackPress and hold Briefly pressPress Repeat button Repeat PlaybackPress Info button twice Press Enter Button at the end of the segmentZoom Function Angle FunctionButtons to select the desired subtitle 1Press Info buttonPress the numeric buttons Using the Title Menu Using Disc MenuPress Menu button to exit the setup screen Press Menu buttonPress Menu Setting the LanguageButton Press Cursor Button to selectPress Menu button Adjusting the TV Aspect Ratio Screen Size43LB 43PSEnter the password Then press Enter button Setting Parental Controls Rating LevelPress Cursor button to Setting the PasswordPress Return button to return to the previous level Setting the Wallpaper Jpeg DVD VCDTo Change the Wallpaper Press OPEN/CLOSEPress Cursor Press Menu button Setting the Speaker Mode Setting the Test TonePress Test Tone button To end the test tone, press Test Tone buttonPress Cursor , 5 to set the Delay Time Setting the Delay TimeYou can adjust the balance and level for each speaker Setting the Audio QualityPress Sound Edit button and then press Cursor To move to ‘SOUNDSetting the DRC Dynamic Range Compression Press ASC button Auto Sound Calibration SetupThis function is available only for DVD/CD playback Virtual Headphone Function Live Surround ModePress SUPER5.1 Press Music buttonDolby Pro Logic II Effect Dolby Pro Logic II ModeListening to Radio Presetting StationsConvenient Functions Adjusting Display BrightnessControl to make the TV indicator flash Press the Mode button on the remoteWhen operating the TV with the remote control TV Brand Code NumberDisc is rotating but no Before Calling for ServicePicture is produced Picture quality is poorSpecifications Memo