Samsung HTDB1680TH/XSV manual Connecting the Speakers

Page 7

Connectingthe Speakers

Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

C

L

SW

R

LS

RS

Front Speaker (L)

Center Speaker

GreenWhite

Front Speaker (R)

Red

CONNECTIONS

Position of the DVD Player

Selecting the Listening Position

Place it on a stand or cabinet shelf, or under

The listening position should be located about 2.5 to 3

the TV stand.

times the distance of the TV's screen size away from the

 

TV. Example: For 32" TVs 2~2.4m (6~8feet)

 

For 55" TVs 3.5~4m (11~13feet)

Blue

Rear Speaker (L)

Purple

Gray

Subwoofer

VOLTAGE SELECTOR

Rear Speaker (R)

Front Speakers L R

Place these speakers in front of your listening position, facing inwards (about 45°) toward you.

Place the speakers so that their tweeters will be at the same height as your ear.

Align the front face of the front speakers with the front face of the center speaker or place them slightly in front of the center speakers.

Center Speaker C

It is best to install it at the same height as the front speakers.

You can also install it directly over or under the TV.

Rear Speakers LS RS

Place these speakers behind your listening position.

If there isn't enough room, place these speakers so they face each other.

Place them about 60 to 90cm (2 to 3feet) above your ear, facing slightly downward.

*Unlike the front and center speakers, the rear speakers are used to mainly handle sound effects and sound will not come from them all the time.

Subwoofer SW

Back of the Speakers

1 Press down the terminal

2 Insert the wire into the

tab on the back of the

terminal and release the

speaker.

terminal tab.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Insert the black wire into the black

 

 

 

 

 

 

 

 

(–) terminal and the gray wire into

 

 

 

 

 

 

 

the gray (+) terminal.

 

 

 

 

 

 

 

Make sure the polarities (+ and –)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

are correct.

Back of the Main Unit

3Connect the connecting jacks (6) to the back of the DVD player.

Make sure the colors of the speaker terminals match the colors of the connecting jacks.

Make sure the polarities (+ and -) are correct.

11

The position of the subwoofer is not so critical. Place it anywhere you like.

Usually, it is placed by a corner near the front speakers.

Black Gray

12

Image 7
Contents Digital Home Theater System Class 1 Laser Product Safety Warnings PrecautionsContents Copy Protection Playable DiscsFront Panel DescriptionBatteries, paying attention to the correct polarities + Insert Remote BatteriesConnecting the Speakers Component Video Best Quality Connecting the Video to TVComposite Video Good Quality Video Better QualityConnecting an External Analog Component Connecting an External Digital ComponentTerminal. Keep the AM loop antenna connected Temporary measureIs good, then fasten it to a wall or other rigid surface Connect the AM loop antenna supplied to the AMSelecting the Video Format Plug the power cord intoAC power supply Press Mode buttonCorresponding Direct Play 1, 2, 3, 4 Disc PlaybackPress Disc Skip button To select a specific disc, pressEach time the Remain button is pressed Displaying Disc InformationPress Info button Press the Remain buttonBriefly press Fast/Slow PlaybackSkipping Scenes/Songs Press and holdPress Enter Button at the end of the segment Repeat PlaybackPress Repeat button Press Info button twiceZoom Function Angle FunctionButtons to select the desired subtitle 1Press Info buttonPress the numeric buttons Press Menu button Using Disc MenuUsing the Title Menu Press Menu button to exit the setup screenPress Cursor Button to select Setting the LanguagePress Menu Button43PS Adjusting the TV Aspect Ratio Screen SizePress Menu button 43LBEnter the password Then press Enter button Setting Parental Controls Rating LevelPress Cursor button to Setting the PasswordPress OPEN/CLOSE Setting the Wallpaper Jpeg DVD VCDPress Return button to return to the previous level To Change the WallpaperTo end the test tone, press Test Tone button Setting the Speaker Mode Setting the Test TonePress Cursor Press Menu button Press Test Tone buttonPress Cursor , 5 to set the Delay Time Setting the Delay TimeTo move to ‘SOUND Setting the Audio QualityYou can adjust the balance and level for each speaker Press Sound Edit button and then press CursorSetting the DRC Dynamic Range Compression Press ASC button Auto Sound Calibration SetupThis function is available only for DVD/CD playback Press Music button Live Surround ModeVirtual Headphone Function Press SUPER5.1Dolby Pro Logic II Effect Dolby Pro Logic II ModeListening to Radio Presetting StationsConvenient Functions Adjusting Display BrightnessTV Brand Code Number Press the Mode button on the remoteControl to make the TV indicator flash When operating the TV with the remote controlPicture quality is poor Before Calling for ServiceDisc is rotating but no Picture is producedSpecifications Memo