Samsung HTDB1680TH/XSV manual Connecting an External Digital Component

Page 9

ConnectingExternal Components

Connecting an External Digital Component

Example: Digital signal components such as a DVD or CD Recorder.

Optical Cable (not included)

VOLTAGE

Connecting an External Analog Component

Example: Analog signal components such as a VCR, Camcorder, and TV.

2.

Press the On/Standby button to switch your DVD Player system on.

CONNECTIONS

The AC Cord must be plugged into an appropriate socket.

 

Before plugging your system into an AC outlet, you must check the voltage.

 

Check the position of the voltage selector on the rear of the system (OPTIONAL).

 

1.

Plug the AC Cord on the rear of the system into an appropriate outlet.

 

VIDEO IN

VIDEO OUT DIGITAL OUT

1 Connect Video Out on the DVD player to Video In on the TV.

2 Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component.

3 Press AUX on the remote control to select ‘DIGITAL IN’.

•Each time the button is pressed, the selection changes as follows: DIGITAL IN ➝ AUX 1 ➝ AUX 2.

•You can also use the FUNCTION button on the main unit.

The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX1 ➝ AUX2 ➝ FM ➝ AM.

15

Audio Cable

If the external

analog component has only one Audio Out, connect either left or right.

LR

1 Connect Video Out on the DVD player to Video In on the TV.

2 Connect Video In on the DVD player to Video Out on the external analog component.

3 Connect Audio In on the DVD player to Audio Out on the external analog component.

•Be sure to match connector colors.

4 Press AUX on the remote control to select AUX 1 or AUX 2.

•Each time the button is pressed, the selection changes as follows: DIGITAL IN AUX 1 AUX 2.

•You can also use the FUNCTION button on the main unit. The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX1 ➝ AUX2 ➝ FM ➝ AM.

VOLTAGE SELECTOR

Video Cable

VIDEO IN

VIDEO OUT

Note

•If you have connected an external digital component and Video In (1, 2) at the same time, there will be video from AUX 1 even when you select DIGITAL IN.

•If you have connected Audio In (L, R) to 1, connect Video In to 1 as well, and if you have connected Audio In (L, R) to 2, connect Video In to 2 also.

16

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Digital Home Theater System Class 1 Laser Product Safety Warnings PrecautionsContents Copy Protection Playable DiscsFront Panel DescriptionBatteries, paying attention to the correct polarities + Insert Remote BatteriesConnecting the Speakers Composite Video Good Quality Connecting the Video to TVVideo Better Quality Component Video Best QualityConnecting an External Analog Component Connecting an External Digital ComponentIs good, then fasten it to a wall or other rigid surface Temporary measureConnect the AM loop antenna supplied to the AM Terminal. Keep the AM loop antenna connectedAC power supply Plug the power cord intoPress Mode button Selecting the Video FormatPress Disc Skip button Disc PlaybackTo select a specific disc, press Corresponding Direct Play 1, 2, 3, 4Press Info button Displaying Disc InformationPress the Remain button Each time the Remain button is pressedSkipping Scenes/Songs Fast/Slow PlaybackPress and hold Briefly pressPress Repeat button Repeat PlaybackPress Info button twice Press Enter Button at the end of the segmentZoom Function Angle Function1Press Info button Buttons to select the desired subtitlePress the numeric buttons Using the Title Menu Using Disc MenuPress Menu button to exit the setup screen Press Menu buttonPress Menu Setting the LanguageButton Press Cursor Button to selectPress Menu button Adjusting the TV Aspect Ratio Screen Size43LB 43PSEnter the password Then press Enter button Setting Parental Controls Rating LevelPress Cursor button to Setting the PasswordPress Return button to return to the previous level Setting the Wallpaper Jpeg DVD VCDTo Change the Wallpaper Press OPEN/CLOSEPress Cursor Press Menu button Setting the Speaker Mode Setting the Test TonePress Test Tone button To end the test tone, press Test Tone buttonPress Cursor , 5 to set the Delay Time Setting the Delay TimeYou can adjust the balance and level for each speaker Setting the Audio QualityPress Sound Edit button and then press Cursor To move to ‘SOUNDSetting the DRC Dynamic Range Compression Auto Sound Calibration Setup Press ASC buttonThis function is available only for DVD/CD playback Virtual Headphone Function Live Surround ModePress SUPER5.1 Press Music buttonDolby Pro Logic II Effect Dolby Pro Logic II ModeListening to Radio Presetting StationsConvenient Functions Adjusting Display BrightnessControl to make the TV indicator flash Press the Mode button on the remoteWhen operating the TV with the remote control TV Brand Code NumberDisc is rotating but no Before Calling for ServicePicture is produced Picture quality is poorSpecifications Memo
Top Page Image Contents