CONNECTIONS
Automatic Connection
1.Connect a power supply to the subwoofer and surround sound speakers.
2.Connect a power supply to the Soundbar, and then press the 
button on the remote control or on the right side of the Soundbar.
3.The subwoofer and surround sound speakers are automatically connected to the Soundbar.
4.When auto pairing is complete, the blue indicators at the rear of the subwoofer and surround speakers turn on.
●● If the red indicator at the rear of the subwoofer or surround speakers is on or the blue indicator flashes continuously, auto pairing cannot occur. If this happens, connect each of the speakers manually.
●● You can enjoy better sound from the wireless subwoofer by selecting a Sound Effect. (See page 9.) ●● Important: Before you begin, put the batteries into the remote. See page 12 for instructions.
| LINK | LINK |
|
| |
Rear of Subwoofer |
| Rear of Surround Speaker |
Connecting the Subwoofer and Surround Speakers Manually if the Automatic Connection Fails
++Before You Begin
●● Make sure that the Soundbar, the subwoofer, and the surround speakers are plugged in. ●● Make sure that the Soundbar is turned on.
1.Press and hold ID SET on the rear of the subwoofer and surround speakers for at least 5 seconds. The red indicator at the rear of each speaker turns off and the blue indicator blinks.
LINK STANDBY ID SET 
LINK STANDBY ID SET
Rear of Subwoofer | Rear of the Left and Right Surround Speakers |
20