Samsung HW-K950/XV manual Using the Network Standby On Function

FUNCTIONS

Using the Network Standby On Function

The Network Standby On function becomes available if a wireless connection has been properly established between a smart device and the Soundbar. This function turns on the Soundbar automatically when a smart device attempts to connect to the Soundbar via Bluetooth or Wi-Fi. If you turn the Soundbar on via a Bluetooth connection, its input mode is set to BT automatically. To turn the Soundbar on via Wi-Fi, you must have the Samsung Multiroom App installed on your smart device.

1.Connect the smart device to your Soundbar.

2.Turn on the Network Standby On function by pressing the LEVEL button on the Soundbar's remote for more than 5 seconds. You can turn the function off by pressing the LEVEL button again for more than 5 seconds.

●● Network Standby On is available only if the Soundbar is listed among the smart device’s paired devices. (The Smart device and the Soundbar must have been previously paired at least once.)

●● Soundbar will appear in the smart device’s searched devices list only when the Soundbar is displaying [BT READY] or [WiFi READY].

●● If the Network Standby On function did not work:

-- The Network Standby On is set to Off. Set it to ON.

●● The Wi-Fi connection to the Soundbar will be terminated if the Soundbar’s power cord is disconnected or the power is cut off. If the power is cut off, turn on the Soundbar and reconnect it.

32