Samsung VC06H70E1HC/SW manual Troubleshooting, Problem Solution

Troubleshooting

PROBLEM	SOLUTION
Motor does not start.	• Check cable, plug and socket.
	• Leave to cool.
Suction force is
gradually decreasing.
	• Check for blockage and remove.
In operation, the
	• Please unclog the intake.
vacuum cleaner stops
after repeating runs
and stops three times.
Cord does not rewind	• Pull the cord out 2-3 m and push down the cord rewind button.
fully.
Vacuum cleaner does	• Check hose and replace if required.
not pick up dirt.
Low or decreasing	• Please check filter and, if required, clean as illustrated in the
	instructions. if filters are out of condition change them to new
suction.
	ones.
Body overheating.	• Please check filters, if required clean as illustrated in the
	instruction.
Static electicity	• Please decrease power suction.
	• This can also occur when air in the room is very dry.
discharge.
	Please ventilate the room till air humidity becomes normal.
The vacuum cleaner	• In order to protect the motor in the cleaner, it rotates slowly
	when you just turn on the cleaner.
makes a strange
	(Before the motor stabilizes,) this causes the loud noise at the
noise.
	initial state and it is not failure in the machine.

This vacuum cleaner is compliant with the following regulations:

-RTTE Directive(1999/5/EC)

-Electromagnetic Compatibility Directive : 2004/108/EEC

-Low Voltage Directive : 2006/95/EC

The official Declaration of conformity may be found at http://www.samsung.com, go to Support Please search Product Support and enter the model name.

English - 18