Samsung LH85OHFPLBC/XV manual Power Control, Auto Power On, Standby Control

Page 76

Power Control

MENU m → System → Power Control → ENTER E

Power Control

Auto Power On	Off

Standby Control	Auto
Network Standby	Off
Power Button	Power On Only

–– The displayed image may differ depending on the model.

Auto Power On

This feature automatically turns on the product as soon as it is plugged in. Pressing the power button is not needed.

•• Off / On

Standby Control

You can set the screen standby mode to be applied when an input signal is received.

•• Auto

Power-saving mode will activate if no input signals are detected even though a source device is connected to the display.

The message No Signal will appear if no source device is connected.

•• Off

The message No Signal will appear if no input signals are detected.

――If No Signal is displayed although a source device is connected, check the cable connection.

――If No Signal Message is set to Off, the No Signal message does not appear. If this is the case, set No Signal Message to On.

•• On

Power-saving mode will activate if no input signals are detected.

76

Image 76

Contents OH85F Table of contents Screen Adjustment Support Before Using the Product CopyrightCleaning Safety PrecautionsPower off the product and computer Electricity and Safety StorageInstallation Samsung Operation Vent or input/output ports, etc Page Checking the Components PreparationsComponents Parts FrontPort Description Remote sensorDP in 1 UHD 60Hz, DP in 2 UHD Reverse Side60Hz Remote Control VOLTo place batteries in the remote control Quickly select frequently used functionsInstallation on a Perpendicular Wall Switching between portrait and landscapeVentilation Wall Mount Specifications Bolt SizeRemote Control RS232C Pin SignalCable Connection RS232C CableLAN Cable Pin No Standard Color SignalGnd Direct LAN cable PC to HUB Cross LAN cable PC to PCConnection Viewing control state Get control command Controlling Set control commandCommand Command type Value rangePower control Volume controlInput source control Input Source An input source code to be set on a productScreen mode control Screen size controlAuto adjustment control PC and BNC only PIP On/Off controlSafety Lock Video Wall Mode ControlFull Natural Video Wall On Video Wall User Control10x10 Video Wall Model Off10x10 Video Wall Model 1 ~ Set NumberBefore Connecting Connecting and Using a Source DevicePre-connection Checkpoints Before connecting cables Power cable connection guide Different power cable colors by countryModel Name Neutral Live CountryConnecting to a PC Connection Using an Hdmi CableConnection Using an HDMI-DVI Cable Connection Using an DP CableConnecting to a Video Device Using an Hdmi cable or Hdmi to DVI Cable up to 1080pConnecting the HDBase-T Connecting to an Audio System Changing the Input source SourceEdit Name Source → SourceUsing MDC UninstallationConnecting to MDC Using MDC via RS-232C serial data communications standardsUsing MDC via Ethernet Connection using a direct LAN cableHome feature Multi ScreenMulti Screen Home → Multi Screen → Enter EPicture Mode Picture ModeOn/Off Timer On TimerOff Timer On/Off TimerHoliday Management Network Settings Network SettingsHome → Network Settings→ Enter E ID Settings ID SettingsDevice ID PC Connection CableVideo Wall Video WallHorizontal x Vertical Video WallScreen Position FormatMore settings More settingsHome → More settings → Enter E Screen Adjustment Menu m → Picture → Picture Mode → Enter EPicture Backlight Brightness Contrast Sharpness Color Tint G/RPicture Mode Picture Mode settings Adjustable options Menu m → Picture → Enter EColor Temperature Menu m → Picture → Color Temperature → Enter EWhite Balance Menu m → Picture → White Balance → Enter E――If Picture Mode is set to Calibration, Gamma is disabled GammaCalibrated Value Menu m → Picture → Calibrated Value → Enter EFilm Mode Off Smart LED Picture OptionsPicture Options Digital NR Off Hdmi Black LevelColor Tone Digital NRHdmi Black Level Auto / Low / NormalFilm Mode Smart LEDColor Tone Off Digital NR Hdmi Black Level Smart LED OffPicture Size Picture SizePicture Size · Zoom/PositionZoom/Position Picture SizeReset Picture Menu m → Picture → Reset Picture → Enter EPicture Off Menu m → Picture → Picture Off → Enter EReset OnScreen Display OnScreen DisplayMulti Screen OnScreen DisplayPIP Landscape PIP PortraitRestrictions Main picture Sub pictureDisplayPort1, DisplayPort2, HDMI2, Hdbt DisplayPort1, DisplayPort2, HDMI1, HdbtTriple Screen Landscape Triple Screen PortraitFour Screen Landscape Four Screen PortraitSource Content Orientation Display OrientationOnscreen Menu Orientation Aspect RatioAvailable Settings Optimum Settings Screen ProtectionPixel Shift Screen ProtectionTimer Timer Off / Repeat / IntervalMessage Display Menu Language Reset OnScreen DisplayMenu m → OnScreen Display → Menu Language → Enter E Setup Initial settings SystemMenu m → System → Setup → Enter E SystemSleep Timer Power On DelayTime Clock SetAuto Source Switching Auto Source SwitchingPrimary Source Recovery Primary SourcePower Control Auto Power OnPower Control Standby Control Auto Network Standby Off Power ButtonAuto Power On Off Standby Control Power ButtonNetwork Standby Eco Solution Eco SolutionBrightness Limit Energy SavingNo Signal Power Off Auto Power OffScreen Lamp Schedule Screen Lamp ScheduleFan & Temperature Fan Speed SettingOutdoor Mode Temperature ControlChange PIN Menu m → System → Change PIN → Enter EPower On Button GeneralSecurity Hdmi Hot PlugReset System Menu m → System → Reset System → Enter ESoftware Update Reset AllSupport Contact SamsungTroubleshooting Guide Testing the ProductChecking the Resolution and Frequency Power off both the PC and productInstallation issue PC mode Screen issueNot Optimum Mode is displayed Check the followingsAdjust Brightness and Contrast Remote control issue SharpnessSource device issue Other issueMulti Screen menu is not available DVI-HDMI cable is connectedThere is no sound in Hdmi mode HDMI-CEC does not workWhen booting the PC with the input source set to IR sensor is not functioningDisplayPort2 Do not appearSettings How can I change the resolution?Question Answer How can I change the frequency?How do I set powersaving mode? QuestionSpecifications Model Name――Plug-and-Play Preset Timing Modes Resolution Optimum resolutionMaximum resolution Synchronization Horizontal FrequencyResolution Vertical Frequency Pixel Clock Sync Polarity KHz MHzResolution Responsibility for the Pay Service Cost to Customers Product damage caused by customers faultAppendix Not a product defectWhat is afterimage burn-in? Optimum Picture Quality and Afterimage Burn-in PreventionOptimum Picture Quality Prevention of Afterimage Burn-inPreventing afterimage burn-in Limited depending on instruction guideLicense Terminology 480i / 480p / 720p

Related manuals

Manual 103 pages 25.21 Kb

Manual 2 pages 4.66 Kb

Manual 106 pages 12.52 Kb