C |
E |
3.Holde the adaptor and turn part (C) in
the arrow direction to loosen it by 5 mm
(*).
4. Insert the adaptor into the water tap, and tighten the screws while lifting up the adaptor.
5. Turn part (C) in the arrow direction to tighten it.
C
6.While holding down part (E), connect the
water hose to the adaptor. Then, release part (E). The hose fits into the adaptor with a clicking sound.
Installation
7.If you are using a screw type of water tap, use the provided
English 19
2016/10/14 14:58:39