Samsung WW75K5210US/SV, WW80K5410US/SV, WW75K5210YW/SV, WW80K5410WW/SV Operations, Control panel

Operations

Control panel

10

02

08

11

09

03 04 0506 07

01	Cycle Selector	Turn the dial to select a cycle.
02	Display	The display shows current cycle information and estimated time
		remaining, or an information code when a problem occurs.
03	Temp.	Press to change the water temperature for the current cycle.
04	Rinse	Press to change the rinse count for the current cycle. You can set the
		rinse count to a max of 5, depending on the cycle.

Press to change the spinning speed for the current cycle.

•Rinse Hold (No indicator): The final rinse process is suspended so that the laundry remains in the water. To unload the laundry, run a drain or spin process.

05	Spin	•	No Spin : The drum does not spin after the final drain process.
		•	Spin Only : To run the Spin Only cycle, press Spin for 3 seconds.
			When the cycle time and spinning speed appear, press Spin
			repeatedly until a desired spinning speed is selected. Then, press
			Start/Pause to start the cycle. The spinning time depends on the
			selected cycle.
		Press to select an option from Intensive, Pre Wash, Press again to
06	Options	deselect.

•Availability of the options depends on the cycle.

07 Bubble Soak	Press to activate/deactivate the Bubble Soak function. This
	function helps remove a wide variety of stubborn stains.
	Delay End lets you set the end time of the current cycle. Based
	on your settings, the start time of the cycle will be determined
08 Delay End	by the machine’s internal logic. For example, this setting is useful
	for programming your machine to finish a wash at the time you
	normally return home from work.
	• Press to choose a preset unit of hours.
	English	29

Operations

WW80K5410US_DC68-03677H-01_EN(Add 5500K Aegis).indd 29

2016/10/14 14:58:43