Samsung WA18M8700GV/SV manual Troubleshooting

Problem		Action
	• Make sure the washing machine is set on a level floor. If the
		floor is not level, use the levelling feet to adjust the washing
		machine.
	• Make sure the washing machine is not contacting any other
		object.
Vibrates excessively	• Make sure the laundry load is balanced.
	•	Make sure the laundry is spread evenly in the washing
or makes noise.
		machine. Spread out the laundry evenly and start again.
	• Make sure the space around the washing machine is free of
		objects.
	• Humming is produced normally during operation.
	• Objects such as coins can cause noise. Remove these objects
		from the washing machine after washing is complete.
	• Plug the power cord into a live electrical outlet.
	• Check the fuse or reset the circuit breaker.
	• Close the door, and press or tap START/PAUSE to start the
		washing machine. For your safety, the washing machine will
		not spin unless the door is closed.
	•	Before the washing machine starts to fill, it will make a series
Stops.		of clicking noises to check the door lock and does a quick
		drain.
	• There may be a pause or soak period in the cycle. Wait briefly
		and the washing machine may start.
	• Make sure the inlet hose screens at the taps are not clogged.
		Periodically clean the screens.
	• This problem occurs temporarily due to low voltages, and will
		be solved when power recovers.
The Eco Tub Clean	• When the machine is diagnosed to be cleaned, the
		indicator blinks for an hour. This recurs 6 consecutive times
alarm does not turn		until you run the Eco Tub Clean cycle. This is normal, and not
off.		a system failure. To keep the tub clean, it is recommended to
		run the cycle once every 1-3 months.

Troubleshooting

English  41

WA8700K(NON-HEATER)_03804E-01_EN.indd 41

2/22/2017 3:55:58 PM