Samsung WA18M8700GV/SV manual Position the drain hose

NOTE

•After connecting the water hose to the adaptor, check if it is connected properly by pulling the water hose downwards.

•Use a standard type of water tap. If the tap is square-shaped or too big, remove the spacer ring before inserting the tap into the adaptor.

For models with an additional hot water inlet:

1. Connect the red end of the hot water hose to the hot water inlet on the back of the machine.

2. Connect the other end of the hot water hose to the hot water tap.

Installation

STEP 4  Position the drain hose

General type

1. Press and hold down the joint ring, and insert it into the drain hose.

2. Insert the drain hose into the drain outlet. Make sure to connect them firmly using the joint ring.

The drain hose is extensible. Adjust the length of the drain hose as needed.

WA8700K(NON-HEATER)_03804E-01_EN.indd 17

English  17

2/22/2017 3:55:52 PM