Samsung HTDB390RH/ELS Aspect ratio cannot be, Remote control does not, Main unit is not working

Page 67

Symptom

Check/Remedy

	• Disc is rotating but no	• Is the TV power on?
	picture is produced.	• Are the video cables connected properly?
	• Picture quality is poor and	• Is the disc dirty or damaged?
	• Picture quality is poor and	• A poorly manufactured disc may not be playable.
	picture is shaking.	• A poorly manufactured disc may not be playable.
	picture is shaking.

•Is the remote control being operated within its operation range of

	The remote control does not	angle and distance?
	work.	• Are the batteries exhausted?
	work.	• Have you select the mode(TV/DVD) functions of the remote
		control (TV or DVD) correctly?

	Audio language and	• Audio language and subtitles will not work for DVDs not containing
	subtitles do not work.	them. And depending on the disc, they may work differently.

	Menu screen does not appear even	• Are you using a disc that does not contain menus?
	when the menu function is selected.	• Are you using a disc that does not contain menus?
	when the menu function is selected.

	Aspect ratio cannot be	• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX
	changed.	mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3
	changed.	ratio only. Refer to the DVD disc jacket and then select the
		appropriate function.

	Can't receive radio	• Is the antenna connected properly?
	broadcast.	• If the antenna's input signal is weak, install an external FM
	broadcast.	antenna in an area with good reception.

	• The main unit is not working.

		• Turn off the power and hold the			button on the main unit for
	(Example: The power goes out or	• Turn off the power and hold the			button on the main unit for
	(Example: The power goes out or	longer than 5 seconds.
	strange noise is heard.)	longer than 5 seconds.
	strange noise is heard.)
	• The DVD player is not	Using the RESET function will erase all stored settings.
	working normally.	Do not use this unless necessary.
	working normally.



	The password for rating	• While the player is in the stop mode, hold the main unit's						button for
	The password for rating	longer than 5 seconds. “INITIAL” appears on the display and all
	level has been forgotten.	settings will return to the default values.
	level has been forgotten.	• Press the POWER button.
		Using the RESET function will erase all stored settings.
		Do not use this unless necessary.

MISCELLANEOUS

66

Image 67

Contents Digital Home Cinema System Class 1 Laser Product Safety WarningsPreparation PrecautionsMulti-Disc Playback & AM/FM Tuner FeaturesContents Max. Playing Time Copy ProtectionDisc Size Mark LogoCD-R MP3 Discs CD-R DiscsCD-R Jpeg Discs Description External Audio Component Video Output ConnectorInput Connector ConnectorAuto Sound Calibration button TV indicatorRange of Operation of the Remote Control Replace the battery coverSelecting the Listening Position Connecting the SpeakersConnect the connecting jacks to the back of the DVD player Installing the Center Speaker to the StandPlace the center speaker on the stand Connect your pair Connecting Wireless Rear SpeakersWireless rear speakers R, to On the front panel Wireless rear amplifierPress the Power button Power Standby mode, press the ON/OFF buttonCoaxial terminal as a temporary measure Please observe the following cautions for your safetyConnect the FM antenna supplied to the FM 75Ω Connecting the Video to TV Connecting an External Digital Component Connecting External ComponentsPress AUX on the remote control to select AUX 1 or AUX Connecting an External Analog ComponentSelecting the Video Format AC power supplyTurn off the main unit and then press NTSC/PAL Press Mode button Press the Power button to turn on the TVPress the Mode button so Press DVD button to select DVD/CD modePlayback starts automatically Disc PlaybackPress OPEN/CLOSE button to open the disc tray Load a disc To stop playback Press Stop during playbackPress Info button Displaying Disc InformationPress and hold Fast/Slow PlaybackPress Slow button Briefly press Skipping Scenes/SongsPress Info button twice Repeat PlaybackPress Repeat button Repeat Playback OptionsA-B Repeat function will not work on an MP3 or Jpeg disc Press Info button twicePress Cursor Press EnterAngle Function Press EZ View button Zoom FunctionPress Zoom ButtonSubtitle display 1Press Info button twicePress Info button Press Cursor TwiceChapter display 1Press Info buttonPress Cursor , buttons Time displayPBC Playback Control Function Using Disc MenuPress Cursor Buttons to Press Enter Select the desiredButton to move to Using the Title MenuPress Menu button to exit the setup screen Press MenuButton to move to Setting the Language‘Setup’ and then Press Enter buttonPress Enter button Press Enter Press CursorPress Cursor 3 button to move to ‘TV Setting TV Screen typePress Cursor 2 button to move to ‘Setup’ and then DISPLAY’ and then43 Pan&Scan LetterboxSetting Parental Controls Rating Level Press Cursor , button Enter the passwordPress Cursor 3 button to move to Press Cursor Button to move to Press Menu button Setting the PasswordButton Enter button Press Cursor 6 button to move to ‘USER’ and then Setting the Wallpaper Jpeg DVD VCD1PLAY/PAUSE button when the image you like comes up During playback, pressButton to open and then ‘Setup’ and thenSpeaker and then press Enter button Setting the Speaker ModeSpeaker Press Enter button Press CursorPress Cursor button Setting the Test Tone‘Audio’ and then Press Test Tone buttonPress Cursor button Setting the Delay TimePress Menu button to move to ‘Audio’ and then press Enter Setting Rear Surround Speakers 3to move to ‘DELAY TIME’ and then press Enter buttonPress Cursor , 5 totime.set the Delay Setting Center SpeakerYou can adjust the balance and level for each speaker Setting the Audio QualityEnter button Press Cursor button Press Sound Method 2 When manually adjusting with the Sound Edit buttonSetting the DRC Dynamic Range Compression ‘DRC’ and then press Enter button To adjust the ‘DRC’.Press CursorPress and hold ASC button twice Briefly press ASC button To Turn On or Off Sound LogoPress and hold ASC button Briefly press ASC button To Verify the Auto Sound CalibrationWhen the message Remove MIC Adjust the volume control on the main Unit as followsPress ASC button Press SUPER5.1 Magic Sound Field ModeMusic Sound Field Function Plug Magic Headphone FunctionPress PL II Mode button Dolby Pro Logic II ModeYou can select the desired Dolby Pro Logic II audio mode Press PL II Effect button Press PL II ModeButton to select ‘MUSIC’ mode Dolby Pro Logic II EffectMain Unit Remote Control Unit Press TunerListening to Radio Band buttonPress 1button and select Presetting StationsTo preset another PressWhat information can RDS signals provide? Using the RDS Radio Data System to receive FM stationsAbout RDS broadcasting PTY Program Type indication and PTY-SEARCH function PTY Search is only applicable to preset stationsBefore you start, remember OFF appears on the display To confirm the sleep timer setting, press Sleep buttonConvenient Functions Press Sleep buttonPress Mute button Press Dimmer buttonWhile holding down POWER, enter the code Operating the TV with the Remote ControlBrand Code TV Brand Code ListSound can be heard only Before Calling for ServiceIs not produced, or the disc Aspect ratio cannot be Remote control does notMain unit is not working Disc Storage Handling discsHandling and Storing Discs 1ch speaker system SpecificationsSubwoofer speaker Movies, these movies are numbered as Title 1, Title 2, etc Be chosen from the menu displayed on the TV monitorDVD player, the player cannot play the disc Subtitle languagesMemo AH68-01445K