6
M a i n t e n a n c e
MAINTENANCE
Failure to follow maintenance instructions below when indicated could result in injury or damage.
Periodic inspection should be performed by a person who is suitably and properly qualified and well acquainted with the design, use and care of the Easytrack System. Contact your local dealer/distributor.
Inspection should be carried out both routinely (at least as often as specified) and, as nec- essary. If any damage to the system is detected through routine inspections, do not use the system and immediately contact your supplier.
Upon receipt of your Easytrack Wall Bracket:
1.Make sure you received all components listed in Figure 8.
2.Inspect all parts for possible damage in transit.
3.Ensure all components are in working order.
4.Repair/replacement of any faulty parts.
5.Keep a log of any repair/replacement required.
Before each time you use the Easytrack Wall Bracket:
1.Clean the outside and inside of the rail and wipe out any water in the rail. Failure to do so for a long period of time can cause corrosion that will weaken the rail.
2.Check that the rail is secure in place. Press the rail upwards to make sure that the rail is locked onto the post.
3.Check if there is any appearance of damage. If there is any appearance of damage, do not use the Easytrack System.
Every month:
1.Clean inside of rail with a damp cloth to ensure there is no dust or grease
2.Check to ensure you still have all your original parts. If any parts are missing they should be replaced before using the Easytrack Wall Bracket again.
3.Check for the appearance of rust. If rust is starting to appear, simply scrub the piece clean.
4.Examine all joints and pieces for wear and fatigue. Replace any part that looks dam- aged or worn. Document inspection and any repairs.
Follow guidelines in your portable lift manual for maintenance and procedures on the lift.
Wall Mount Assembly