Crimestopper Security Products SP-500 manual Vehicle Operation, Vehicle Control, Vehcle Notes

2-VEHICLE OPERATION

2 VEHICLE CONTROL

Your remotes have the ability to control a second vehicle with a Crimestopper system installed.

To set up the 2-Vehicle operation you must first program your remotes to Vehicle #2. Follow the “Transmitter Programming” steps (Pg. 26) at the second vehicle and learn YOUR remote, along with vehicle #2’s existing remotes.

2-VEHCLE NOTES:

(1)You do not have to switch between Vehicle “1” and “2” to get pages from each vehicle. Your remote pager will receive pages from both cars regardless of which vehicle the pager is set to. The “1” or “2” icon will always display with each page indicate which vehicle the page originated from.

(2)When, all remote/pagers and sidekick remotes for that vehicle must be learned at the time of programming. When you program your remote at the second vehicle, that vehicle’s original remote must also be programmed. Your remote should be set in Vehicle “2” and the vehicle’s original remote should be set in Vehicle “1”.

VEHICLE 1 = RED LED VEHICLE 2 = BLUE LED

VEH 1 / VEH 2 Push 2 Seconds to change from Vehicle 1 to 2.

	VEHICLE 1 or 2
	FUNCTION 1 or 2
2 - 1	TRANSMIT ICON
	VEH 1 / VEH 2
	CLOCK SET
	Push 2 Seconds
	to change from
	Vehicle 1 to 2.

27