Samsung SHR-3010P manual Connection to External Devices, Connection with Multiplexer

DIGITAL VIDEO RECORDER

GBGB

Connection to External Devices	Connection with Multiplexer
	2(e.g. connection to SDM-160)
1

CAMERARX

MICROPHONE

SIREN LIGHT

	CAMERA
	1
	2
	3
	.
TRIGGER OUT	.
	.
ALARM IN	16
GND	MONITOR
	OUT
SHR-3010 VIDEO RECORDER
	AC IN
VIDEO IN	SDM-160 DIGITAL MULTIPLEXER
VIDEO OUT

VIDEO OUT AUDIO OUT LAN SHR-3010 VIDEO RECORDER

(NTSC/PAL MONITOR)

■This unit can be connected to external devices such as a camera for video signal input, a microphone for audio signal input, and an NTSC or PAL monitor for video and audio signal output.

■It can be connected to external devices such as an alarm according to the user’s request.

■It can be connected to a PC through a LAN or Serial connection for remote control.

■Your may back up data with a backup device using SCSI for the purpose of data backup.

Caution

–A CRT monitor capable of displaying an NTSC or PAL video signal must be used with this unit. An ordinary computer monitor cannot be used.

–The backup device of this equipment is applicable only to SCSI HDDs.

■SDM-160 is a Multiplexer for NTSC, and SDM-160P is a Multiplexer for PAL.

■For details on the functions of SDM-160, please refer to the user’s guide of SDM-160.

■Connect this unit’s video signal input jack to the video signal output jack of SDM-160 and connect this unit’s video signal output jack to the video signal input jack of SDM-160.

■Connect the alarm output jack (ALARM OUT) of SDM-160 to this unit’s alarm input jack (ALARM IN), and connect the VTI jack of SDM-160 to this unit’s trigger output jack (TRIGGER OUT).

■Connect both GND terminals together.

Caution

-Be sure to connect the trigger output terminal (TRIGGER OUT) of this unit to the Multiplexer. Otherwise, a normal recording cannot be made.

(For the connection method, please refer to the user’s guide for the Multiplexer you want to use.)

-If the system’s recording field rate is set to 0.50 ~ 15 FPS (Fields Per Second) for the input NTSC video signal and to 0.50 ~ 12.5 FPS for the input PAL video signal, be sure to set the Multiplexer in such a way that the recording output screen is switched by the Trigger Pulse. (For settings related to the recording field rate, please refer to “# PICTURE RATE” on p. 3-15.)

-If the system’s recording filed rate is set to 30 FPS for the input NTSC video signal and to 25 FPS for the input PAL video signal, a half of the input video channels may not be recorded depending on the type of Multiplexer. In this case, set the recording field rate to 60 FPS for NTSC and to 50 FPS for PAL.

2-1 2-2