Samsung SHR-3010P manual Retrieval by Date and Time Recorded Data List View

DIGITAL VIDEO RECORDER

GB			GB
		3
2
	Retrieval by Date and Time	Recorded Data List View

DATE & TIME SEARCH

DATE	2002-01-01
TIME	00:00:00
[SEARCH	START]

EXIT=[SEARCH] SEARCH=[SET/STILL]

Following screen appears and light of the PLAY( ) button flickers if pressing the SET/STILL

( ) button after entering date and time to retrieve and placing the cursor at search.

1

O SEARCH O

»2001-09-24 00:30:00

You can play retrieval data if pressing the PLAY( ) button. Press the STOP( ■ ) button to stop play. Following screen is a screen appearing when pressing the PLAY( ) button. Date and time below the screen show when currently played data are recorded and figures at the far end shows which times of frame of the relevant second.

1

2001-09-24 00:34:28

RECORD	EVENT SEARCH		[01/04]
ID	EVENT	DATE	TIME

01 RECORD START 2001-09-24 00:23:28

02 RECORD START 2001-09-24 00:30:00

03 RECORD START 2001-09-24 01:49:31

04 RECORD START 2001-09-24 02:00:00

EXIT=[SEARCH] SEARCH=[SET/STILL]

The data on the HDD will be displayed as a list based on the recording start time. The list will be updated every 30 minutes. Therefore, the system will create a new list at every half-hour on the hour during the recording.

The system begins the recording when the RECORD(●) button is pressed, or when a motion is detected or alarm is triggered, or when the timer recording time is up, here the list of the data recorded by motion detection or alarm occurrenceis not displayed.

Position the cursor at one of items on the list of the recorded data and press the SET/STILL

( ) button, then the following screen appears and the PLAY( ) button flashes.

1

O SEARCH O

»2001-09-24 00:23:28

At this time, if you press the PLAY( ) button, the selected data will be played back. To stop the playback, press the STOP(■ ) button for 3 seconds. The below screen is the screen when pressing the PLAY( ) button.

1

2001-09-24 00:23:44

5-3 5-4