Samsung NZ63J9770EK/EU, NZ63J9770EK/EE manual Residual heat indicator, Temperature detection

Page 25

Residual heat indicator

When an individual cooking zone or the hob is turned off, the presence of residual heat is

shown with an , (for “hot”) in the digital display of the appropriate cooking zones. Even after the cooking zone has been switched off, the residual heat indicator goes out only after the cooking zone has cooled.

You can use the residual heat for thawing or keeping food warm.

WARNING

As long as the residual heat indicator is illuminated, there is a risk of burns.

WARNING

If the power supply is interrupted, the

, symbol will go out and information about residual heat will no longer be available.

However, it may still be possible to burn yourself. This can be avoided by always taking care when near the hob.

features

Temperature detection

If for any reason the temperatures on any of the cooking zones were to exceed the safety levels, should this happen then the cooking zone will automatically reduce to a lower power level.

When you have finished using the hob, the cooling fan will continue to run until the hob’s electronics has cooled down. And the cooling fan switched itself off depending upon the temperature of the electronics.

Parts and

English  25

NZ63J9770EK_EU_DG68-00634A-02_EN.indd 25

4/5/2017 5:04:14 PM

Image 25
Contents Induction Hob Contents Warranty and service Model name & serial number Using this manualSafety instructions Safety instruction Safety instruction Safety instruction Proper disposal of your old appliance Disposing of the packaging materialSafety instruction Safety instructions for the installer Installing the hobConnecting to the mains power supply 02 04 560 mm Installing into the countertopMax mm, Min mm Min mm 15 mm 520 mm 480 mm 25 mm NZ63J9770EKEUDG68-00634A-02EN.indd 2017 50408 PM NZ63J9770EKEUDG68-00634A-02EN.indd 2017 50410 PM Cooking zones Parts and featuresControl panel Induction heating ComponentsKey features of your appliance Safety shutoff Virtual flame technology Temperature detection Residual heat indicatorHob use Initial cleaningCookware for induction cooking zones Size of pans Suitability testOperating noises Using suitable cookware Switching the appliance on Using the touch control sensorsSelect cooking zone and heat setting Quick stop Switching the appliance offUsing the child safety lock Timer Use Power boost control Using keep warmPause Power managementTouch the Wide Flex zone sensor Flex controlSound on/off Suggested settings for cooking specific foods Hob Cleaning and careLight soiling Stubborn soiling Problem dirtTo avoid damaging your appliance Hob frame optionFAQs and troubleshooting Warranty and serviceInformation code Possible cause Solution Service Technical data Technical dataSupplier’s name Product informationQuestions or Comments
Related manuals
Manual 1 pages 26.59 Kb