Samsung NZ63J9770EK/EU, NZ63J9770EK/EE manual Suitability test, Size of pans, Operating noises

Page 27

Suitability test

NOTE

Can be suitability test using the Magnetic Knob.

Cookware is suitable for induction cooking, if a magnet sticks to the bottom of the cookware and cookware is labelled as suitable by the cookware manufacturer.

NOTE

Induction cooking may not function properly on nonferrous cookware whose edge doesn't stick to the magnet, or on nonferrous cookware whose bottom is iron-coated.

Size of pans

Induction cooking zones adapt automatically to the size of the bottom of the cookware up to a certain limit. However the magnetic part of the bottom of the cookware must have a minimum diameter depending upon the size of the cooking zone.

Diameter of cooking zones

Minimum diameter of the bottom of the cookware

 

 

220 mm

140 mm

 

 

Front or Rear Flex

140 mm

 

 

Complete Flex

240 mm (long side dimension), oval, fish kettle

 

 

Hob use

Operating noises

If you can hear.

Cracking noise: cookware is made of different materials.

Whistling: you use more than two cooking zones and the cookware. is made of different materials.

Humming: you use high power levels.

Clicking: electric switching occurs.

Hissing, Buzzing: the fan operates. The noise are normal and do not refer to any defects.

English  27

NZ63J9770EK_EU_DG68-00634A-02_EN.indd 27

4/5/2017 5:04:15 PM

Image 27
Contents Induction Hob Contents Warranty and service Model name & serial number Using this manualSafety instructions Safety instruction Safety instruction Safety instruction Proper disposal of your old appliance Disposing of the packaging materialSafety instruction Safety instructions for the installer Installing the hobConnecting to the mains power supply 02 04 560 mm Installing into the countertopMax mm, Min mm Min mm 15 mm 520 mm 480 mm 25 mm NZ63J9770EKEUDG68-00634A-02EN.indd 2017 50408 PM NZ63J9770EKEUDG68-00634A-02EN.indd 2017 50410 PM Cooking zones Parts and featuresControl panel Induction heating ComponentsKey features of your appliance Safety shutoff Virtual flame technology Temperature detection Residual heat indicatorInitial cleaning Hob useCookware for induction cooking zones Suitability test Size of pansOperating noises Using suitable cookware Switching the appliance on Using the touch control sensorsSelect cooking zone and heat setting Quick stop Switching the appliance offUsing the child safety lock Timer Use Power boost control Using keep warmPause Power managementTouch the Wide Flex zone sensor Flex controlSound on/off Suggested settings for cooking specific foods Cleaning and care HobLight soiling Stubborn soiling Problem dirtTo avoid damaging your appliance Hob frame optionFAQs and troubleshooting Warranty and serviceInformation code Possible cause Solution Service Technical data Technical dataSupplier’s name Product informationQuestions or Comments
Related manuals
Manual 1 pages 26.59 Kb