Samsung NZ63J9770EK/EU, NZ63J9770EK/EE manual Safety shutoff

Page 23

 

 

 

 

• Magnetic Knob: The power control is

• Quick Stop: This option reduces the step

easy, simple and intuitive by using

and time it takes to stop cooking by

Magnectic Knob.

simple one touch.

Wide Flex zone: The Wide Flex zone is a large, rectangle-shaped area designed for cooking multiple dishes.

Safety shutoff

If one of the cooking zones is not switched off or the heat setting is not adjusted after an extended period of time, that particular cooking zone will automatically switch itself off.

Any residual warmth will be indicated with , (for “hot”) in the digital displays corresponding to the particular cooking zones.

The cooking zones switch themselves off at the following times.

Heat setting

Switch off

 

 

1-3

After 6 hours

 

 

4-6

After 5 hours

 

 

7-9

After 4 hours

 

 

10-15

After 1.5 hours

 

 

NOTE

If the Hob is overheated because of

abnormal operation, will be displayed. And the Hob will be switched off.

NOTE

If cookware is unsuitable or too small or no cookware has been placed on the cooking

zone, will be displayed.

And after 1 minute the corresponding cooking zone will be switched off.

NOTE

Should one or more of the cooking zones switch off before the indicated time has elapsed, see the section “Troubleshooting”.

Parts and features

Other reasons why a cooking zone will switch itself off

All cooking zones will switch themselves off if liquid boils over and lands on the control panel.

The automatic shutoff will also be activated if you place a damp cloth on the control panel. In both of these instances, the appliance will need to be switched on again using the main On/ Off control sensor after the liquid or the cloth has been removed.

English  23

NZ63J9770EK_EU_DG68-00634A-02_EN.indd 23

4/5/2017 5:04:14 PM

Image 23
Contents Induction Hob Contents Warranty and service Model name & serial number Using this manualSafety instructions Safety instruction Safety instruction Safety instruction Proper disposal of your old appliance Disposing of the packaging materialSafety instruction Safety instructions for the installer Installing the hobConnecting to the mains power supply 02 04 560 mm Installing into the countertopMax mm, Min mm Min mm 15 mm 520 mm 480 mm 25 mm NZ63J9770EKEUDG68-00634A-02EN.indd 2017 50408 PM NZ63J9770EKEUDG68-00634A-02EN.indd 2017 50410 PM Cooking zones Parts and featuresControl panel Induction heating ComponentsKey features of your appliance Safety shutoff Virtual flame technology Temperature detection Residual heat indicatorCookware for induction cooking zones Initial cleaningHob use Operating noises Suitability testSize of pans Using suitable cookware Switching the appliance on Using the touch control sensorsSelect cooking zone and heat setting Quick stop Switching the appliance offUsing the child safety lock Timer Use Power boost control Using keep warmPause Power managementTouch the Wide Flex zone sensor Flex controlSound on/off Suggested settings for cooking specific foods Light soiling Cleaning and careHob Stubborn soiling Problem dirtTo avoid damaging your appliance Hob frame optionFAQs and troubleshooting Warranty and serviceInformation code Possible cause Solution Service Technical data Technical dataSupplier’s name Product informationQuestions or Comments
Related manuals
Manual 1 pages 26.59 Kb