Using this manual, Safety instructions

using this manual

Thank you for choosing a SAMSUNG Built - In Oven.

This user Manual contains important information on safety and instructions intended to assist you in the operation and maintenance of your appliance.

Please take the time to read this Owner’s Manual before using your oven and keep this book for future reference.

The following symbols are used in the text of this Owner’s Manual:

WARNING or CAUTION	Important

safety instructions

Note

Installation of this oven must be performed only by a licensed electrician. The installer is responsible for connecting the appliance to the mains power supply in observance of the relevant safety

recommendations.

Electrical safety

If the oven has been damaged in transport, do not connect it.

•This appliance must be connected to the mains power supply only by a specially licensed electrician.

•In the event of a fault or damage to the appliance, do not attempt to operate it.

•Repairs should be performed by a licensed technician only. Improper repair may result in considerable danger to you and others. If your oven needs repair, contact a SAMSUNG Service Centre or your dealer.

•If the supply cord is defective, it must be replaced by a special cord or assembly available from the manufacturer or an authorised service agent. (Fixed wiring type appliance only)

•If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. (power cord type appliance only)

•Electrical leads and cables should not be allowed to touch the oven.

•The oven should be connected to the mains power supply by means of an approved circuit breaker or fuse. Never use multiple plug adapters or extension leads.

•The rating plate is located on the right side of the door.

• The power supply of the appliance should be turned off when it is being repaired or cleaned.

•Take care when connecting electrical appliances to sockets near the oven.

•This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

•It should allow to disconnection of the appliance from the supply after installation. The disconnection may be achieved by having the plug accessible or by incorporating a switch in

the fixed wiring in accordance with the wiring rules.

If this appliance has steam cooking function, do not operate this appliance when the water supply cartridge is damaged.

•When the cartridge is cracked or broken, do not use it and contact your nearest service center.

•Failing to do so may result in injury.

WARNING: Accessible parts may become hot during use. To avoid burns young children should be kept away.

WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements inside the oven. Children less than 8 years of age shall be kept away unless continuously supervised.

WARNING: Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock.

2_using this manual

BF1 Series_XEE-00352C_EN.indd 2

2011-06-27 8:22:19

BF1C6G133/XEE specifications

The Samsung BF1C6G133/XEE is a highly regarded component within the realm of memory modules, specifically designed to cater to a variety of computing needs. This DDR3 SDRAM (Synchronous Dynamic Random Access Memory) module is known for its balanced performance and efficiency, making it a suitable choice for various applications ranging from personal computing to servers.

One of the standout features of the BF1C6G133/XEE is its capacity. Typically offered in a 4GB configuration, it provides ample memory for multitasking, allowing users to run multiple applications simultaneously without significant performance degradation. This is particularly beneficial for users who frequently switch between programs or engage in memory-intensive tasks.

The operating speed of the BF1C6G133/XEE is another key attribute. With a standard clock speed of 1333 MHz, it delivers reliable performance that meets the needs of most modern applications. This speed ensures that data can be processed swiftly, contributing to an overall enhanced user experience. Moreover, the module adheres to the JEDEC standards, ensuring compatibility with a wide range of devices and systems.

Energy efficiency is a focus in the design of the BF1C6G133/XEE, operating at a voltage of 1.5V. This lower voltage consumption not only helps in reducing power costs but also plays a role in prolonging the lifespan of the memory module. Additionally, the idea of heat dissipation is addressed through its construction, helping to maintain optimal operating temperatures even under heavy workloads.

The memory module also incorporates advanced features such as ECC (Error-Correcting Code), which provides an added layer of reliability. ECC detects and corrects internal memory corruption, making the BF1C6G133/XEE a favored choice for mission-critical applications where data integrity is paramount.

In terms of physical characteristics, the module is designed in a standard DIMM form factor, ensuring easy installation and compatibility with a wide range of motherboards. Its compact design allows for better airflow within a PC case, further enhancing performance.

Overall, the Samsung BF1C6G133/XEE stands out as a robust and efficient memory solution that combines speed, reliability, and energy efficiency, making it an ideal choice for a host of computing environments. Whether in a gaming rig, a workstation, or a server, this module is equipped to handle the demands of today’s technology-rich landscape.