EdgeStar AP410W manual Control panel, LED indicators

Control panel

LED indicators
1.	“ST”	=	Set Temperature
	When this light is lit (when the TEMP. UP or TEMP. DOWN buttons are
	pressed), the LED display shows the temperature that the unit is set to cool to.
2.	“RT”	=	Room Temperature
	When this light is lit the LED display shows the current ambient temperature in
	the room.
3.	“LO”	=	Low Fan Speed
	This light is lit when the fan speed is on Low.
4.	“HI”	=	High Fan Speed
	This light is lit when the fan speed is on High.
5.	“AUTO”	=	Auto Mode
	This light is lit when the Auto mode is selected. The Auto mode is factory preset
	to maintain an ambient temperature of 73°F. If the ambient temperature is above
	73°F, the unit will operate in cooling mode. If the ambient temperature is equal to
	or below 73°F, the unit will operate in Fan mode.
6.	“COOL”	=	Cooling Mode
	This light is lit when the Cooling mode is operating.
7.	“DRY”		=	Dehumidifier Mode
	This light is lit when the Dehumidifier mode is operating. The Dehumidifier mode
	is factory pre-set to one dehumidification setting- and the dehumidification
	settings cannot be user-altered.
8.	“FAN”	=	Fan Mode
	This light is lit when the Fan mode is operating.
9.	“TIMER”	=	Timer On
	This light is lit when the Timer is on. See below for a description of the Timer.
10.	“RUN”	=	Unit On
	This light is lit when the unit is on.

12