EdgeStar AP410W manual

Page 15

This button activates or deactivates the “On timer.” As noted in more detail above, the On timer turns the portable air conditioner on after a number of hours (you select the number of hours) elapses. To set the On timer using the remote control, the portable air conditioner must be off. Press the On timer button once. Press the Hour button several times until your desired number of hours appears in the remote control. Press the On timer button again to set the portable air conditioner to turn on in that number of hours.

7.“Off Timer” button

This button activates or deactivates the “Off timer.” As noted in more detail above, the Off timer turns the portable air conditioner off after a number of hours (you select the number of hours) elapses. To set the Off timer using the remote control, the portable air conditioner must be on. Press the Off timer button once. Press the Hour button several times until your desired number of hours appears in the remote control. Press the Off timer button again to set the portable air conditioner to turn on in that number of hours.

8.Power button

This button turns the air conditioner on or off.

9.Hour button (for on/off timer)

As noted above, this button adjusts the number of hours to delay the On or Off timer. Additionally, this button is used to adjust the clock function of the remote control.

10.Minute button

This button is used to adjust the time on the clock function of the remote control. To set the clock, make sure the remote control is off.

a.Press and hold the On timer and Off timer buttons

b.After about 2 seconds, the clock icon in the LCD display will start blinking. When it starts blinking, release the buttons.

c.Adjust the time with the hour and minute buttons. Each time you press the hour button, the hour portion on the time will increase by 1. Each time you press the minute button, the minute portion on the time will increase by 1.

d.When you have reached the correct time, press and hold the On timer and Off timer buttons until the clock stops flashing. Release the buttons- the time is now set.

15

Image 15
Contents Page Table of contents Thank you Energy saving tips Specifications Safety precautionsPage Parts Front viewRear view Accessories Installing the exhaust hose InstallationWindow installation Wall installation permanent mounting Page Control panel LED indicatorsRemote Control Setting up the remote controlButtons Remote control functions Page Regulating airflow direction Manual drainage Drain partsDraining with the drain tray Prefilter and charcoal filter MaintenanceCleaning the exterior Cleaning the condenser coilsInstalling the charcoal filter Cleaning the prefilterLong term storage Problem Possible Causes Solutions TroubleshootingPage Lcdi plug wring instruction Plug Testing InstructionsWhat is Covered Limited warranty