Operating Instructions, Control Panel Overview

Operating Instructions

On/Off Button	Press the button once to manually turn the unit on.
	Press once more to turn the unit off.
“+” / “-“ Button	In COOL mode, press “-“once, the set temperature will
	decrease by 1° degree Fahrenheit. Continue to press
	to get to desired temperature. Press “+” to increase,
	follow same instructions as above.
Mode Button	Press MODE button repeatedly to cycle between
	modes: Cooling, Dry, and Fan Only mode. Each
	press the MODE button will light up a different light on
	control panel. Remember that the exhaust hose and
	window kit must be installed when the unit is in Cool or
	Dry Mode. It is unnecessary to have them connected
	if you are on Fan Only mode.
Fan Speed	When the unit is running in Cool or Fan mode, press
	the Fan speed button to select the fan speed desired.
	There are four fan speeds, High, Middle, Low, and
	Auto.
Water Full	When Cool or Dry is running condensation will drain to
	the water reservoir. When the water tank is full a
	buzzer will sound eight times indicating to empty. An
	error code “H8” will also display on LED screen.
	Please follow instructions on how to drain on page 9.

Louver Direction	This unit has 4-Way directional louvers. Use the louver
	guides to direct air where cooling or fan is needed
	most. Hold the louver and adjust the air flow direction
	as show in diagram on following page.