EdgeStar AP10002BL owner manual Installation of the Exhaust Hose

Page 9

4	Cut the foam seal B to the proper
	length and attach it to the window

panel.

5	Close the window sash securely
	against the window panel.

6	Cut the foam seal A to an
6	appropriate length between the
	top of the inner window sash and
	outer window sash.
7	Attach the bracket with a screw.

	Installation of the Exhaust Hose
1	Attach the window exhaust
1	adapter B and C to the exhaust

hose. Extend both ends of the exhaust hose and insert them into the window exhaust adapter A and B and turn them until they stop. Make sure they are securely attached.

Edgestar Portable Air Conditioner

6

Image 9

Contents AP10002BL Important Safety Information Electrical SafetyGeneral Safety Table of Contents For Your Records IntroductionParts Key Parts IdentificationParts Included Preparations for installing the window kitWindow Kit Installation Instructions Attach the window panel to Installation of the Exhaust Hose Page Installation of the Drain Hose Direct drainage Draining the UnitInstalling the Filter Control Panel Overview Operating InstructionsButton Function Directional Louvers Remote Control OverviewInstalling the batteries Cooling ModeFan Only Mode Sleep Energy Saving GuideMaintenance Cleaning the unitCleaning the pre-filter Preparation for Storage Issue Possible Cause Solution TroubleshootingIssue Possible Cause Solution Issue Possible Cause Solution Specifications One 1 Year Parts & Ninety 90 Days Labor EdgeStar Limited Warranty