Table of Contents | Heatiator GC150 specification

	GC150 SERIES DIRECT VENT GAS APPLIANCE
	Table of Contents
I.	Listings and Code Approvals	3
II.	Description of the Fireplace System	3
III. Fireplaces System Components and Dimensions		4
IV.	Pre-Installation Preparation	6
	A. Gas Pressure	6
	B. High Altitude Installation	6
	C. Fireplace Locations and Space Requirements	6
	D. Clearances	6
	E. Framing The Fireplace	7
	F. Finishing Materials	7
V.	Step-By-Step Installation of the Fireplace System	8
	A. Horizontal Termination	8
	B. Vertical Termination	11
VI.	Operating Instructions	19
	A. Standing Pilot Operation	22
	B. Electronic Ignition Operation	23
VII.	Maintenance Instructions	24
VIII.	Trouble Shooting	25
IX.	Replacement Parts	27
	Safety Precautions

1.Please read these installation instructions complete- ly before beginning installation procedures. Failure to follow them could cause a fireplace malfunction resulting in serious injury and/or property damage.

2.Always check your local building codes prior to installation. This installation must comply with all local, regional, state and national codes and regula- tions.

3.Installation and repair should be done by a qualified service person. This appliance should also be inspected annually by a qualified service person. More frequent inspections/cleaning may be required due to excessive lint from carpeting, bedding materi- al, etc. It is imperative that the control compartment, burners and circulating air passage ways of the appliance be kept clean.

4.The GC150 fireplace is a vented gas fireplace. Do not burn wood or other material in this appliance.

5.NEVER leave children unattended when there is a fire burning in the fireplace.

6.This fireplace may be vented horizontally through an outside wall or vertically above the roof line and must not be connected to a chimney flue servicing a solid fuel burning appliance.

7.NEVER use gasoline, gasoline-type lantern fuel, kerosene, charcoal lighter fluid, or similar liquids in this fireplace. Keep any flammable liquids a safe distance from the fireplace.

8.While servicing this fireplace, always shut off all electricity and gas to the fireplace. This will prevent possible electrical shock or burns. Also, make sure

the unit is completely cooled before servicing.

9.During any pressure testing of the gas supply piping system that exceeds test pressures of 1/2 psig, this appliance and its individual shut-off valve must be disconnected from the piping system. If test pres- sures equal to or less than 1/2 psig are used in pres- sure testing the gas supply piping system, this appli- ance must be isolated from the piping system by closing its individual manual shut-off valve during testing.

10.Do not use this appliance if any part has been under water. Immediately call a qualified service techni- cian to inspect the appliance and to replace any part of the control system and any gas control which has been under water.

11.Be sure to provide adequate clearances around the air openings into the combustion chamber and ade- quate accessibility clearances for servicing and proper operation.

12.The appliance and its individual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of 1/2 psi (3.5 kPa).

13.Provisions shall be made to provide adequate combustion and ventilation air.

14.The appliance area shall be kept clear and free from combustible materials, gasoline and other flammable vapors and liquids.

15.The flow of combustion and ventilation air should not be obstructed.

2-99

21322L

GC150 specifications

The Heatiator GC150 is an innovative heating solution designed to provide efficient warmth in various residential and commercial settings. With an emphasis on technology and user experience, the GC150 combines modern features with powerful performance. Its sleek design fits harmoniously into different interior styles, making it a beautiful addition to any space.

One of the standout features of the Heatiator GC150 is its advanced heating technology. The unit utilizes a highly efficient heating element that quickly warms up a room while minimizing energy consumption. This energy-efficient operation not only helps reduce utility bills but also promotes a more sustainable approach to heating. The GC150 is equipped with a programmable thermostat, allowing users to set their desired temperature and optimize energy usage based on personal schedules.

The Heatiator GC150 also boasts a rapid heating capability, ensuring that it delivers consistent warmth even in large areas. This is achieved through its convection heating design, which circulates warm air evenly throughout the room. The result is a comfortable, balanced environment without cold spots or drafts.

Safety features are another significant aspect of the Heatiator GC150. The unit includes an overheating protection mechanism that automatically shuts off the device if it reaches an unsafe temperature. Additionally, the GC150 is designed with a sturdy, cool-touch exterior, preventing burns or accidental injuries, making it suitable for homes with children or pets.

Another important characteristic of the GC150 is its quiet operation. Unlike traditional heating units that can be noisy, the Heatiator GC150 runs silently, allowing for an undisturbed environment. This is particularly beneficial for bedrooms, offices, or other spaces where concentration and relaxation are essential.

Ease of use is prioritized with the Heatiator GC150, featuring user-friendly controls and an informative digital display. Users can effortlessly navigate through various settings, select heat levels, and adjust timers for convenient operation.

In summary, the Heatiator GC150 is a versatile and efficient heating solution that offers a blend of innovation, safety, and user convenience. Its advanced features, such as programmable thermostats, rapid heating capabilities, and quiet operation, make it a worthwhile investment for any setting, ensuring comfort throughout the colder months without compromising energy efficiency.