Heath Zenith 5408 / 5410 manual Installation, Eave Mount Wall Mount, Wire the Light Control

Page 2

INSTALLATION

Wire the Light Control

For easy installation, select an existing light operated by a wall switch for replacement.

For best performance, mount the fixture about 8 feet (2.4 m) above the ground. NOTE: If fixture is mountedhigherthan8ft.(2.4m),aimingthesen-

sor down will reduce coverage distance.

Drill the holes needed to mount the backplate to the junction box.

WARNING: Turn power off at circuit breaker or fuse.

Remove the existing light fixture.

Route the light control's wires through the large gasket hole.

Connect the junction box wires to the light control wires. Twist together and secure with a wire connector.

NOTICE: 5410 models with Flash Alert feature will also have a wire loop which can be used to disable the flash alert feature. This wire loop should not be connected to any other wire.

Black to Black

White to White

Eave Mount Wall Mount

For under eave installation, the sensor head must be rotated as shown in the next two steps for proper operation and to avoid the risk of electrical shock.

For eave mount only:

Gasket

 

Rotate the sensor head towards the clamp screw joint.

Control Switch

Joint Clamp

Then rotate the sensor head clockwise 180° so the controls face down.

If the sensor pops out of the ball joint, loosen the clamp screw and push the sensor back into the ball joint. Tighten the clamp screw when done.

Flash Alert - Activated

(Blue)

598-1303-01

Image 2
Contents Requirements FeaturesOperation Eave Mount Wall Mount InstallationWire the Light Control Black to Black White to WhiteTo Deactivate the Flash Alert Test and AdjustmentTurn on the circuit breaker and light switch Flash Alert Deactivated Blue Mount the Light ControlAim Sensor Down for Short Coverage Higher for Long SpecificationsAvoid aiming the control at Troubleshooting Guide No Service Parts Available for this ProductTWO Year Limited Warranty Requisitos FuncionamientoCaracterísticas Resumen de las modalidades del InterruptorConecte El Control De Luz InstalacionMontaje en pared Montaje en alero Advertencia Desconecte la energía en el disyuntorPrenda el cortacircuitos y el interruptor de luz Prueba Y AjustePara Desactivar el Destello de Alerta Especificaciones Evite apuntar el control haciaNo hay piezas de servicio disponibles para este producto Guia DE Investigacion DE AveriasServicio Técnico Garantía Limitada a 2 Años Caractéristiques Résumé du mode de commutationFonctionnement ExigencesAlerte par clignotement Activée bleu Montage sous Montage mural Avant-toitDu détecteur doivent être tournées vers le bas Alerte par clignotement Désactivée bleu Essais ET RéglagesDésactivation de l’alerte par clignotement Fiche Technique Éviter de pointer l’appareilAucune pièce de rechange n’est disponible pour ce produit Service TechniqueGuide DE Dépannage Garantie Limitée DE 2 ANS 598-1303-01 Nº de modelo / N de modèle

5408 / 5410 specifications

Heath Zenith is known for its innovation in outdoor lighting solutions, and the models 5408 and 5410 are testament to their commitment to quality and performance. Both of these models are designed to enhance the safety and aesthetics of outdoor spaces while providing advanced features that cater to modern homeowner needs.

The Heath Zenith 5408 and 5410 are equipped with a sophisticated motion detection system that allows for efficient energy use. Both models boast a robust sensor that detects motion within a specific range, automatically activating the light when movement is detected. This not only conserves energy but also provides an added layer of security to homes by illuminating pathways and entry points during the night.

One of the standout features of both the 5408 and 5410 is their adjustable settings. Homeowners have the flexibility to customize the sensitivity of the motion sensor, allowing them to reduce false alarms due to passing animals or other non-threatening movements. Additionally, both models offer various time settings, letting users decide how long the light stays on after detecting motion, with options usually ranging from 30 seconds to several minutes.

In terms of durability, the Heath Zenith 5408 and 5410 are designed to withstand outdoor conditions. Both units feature weather-resistant construction and are built from high-quality materials that protect against rust and corrosion. This durability ensures that the lights will continue to operate effectively, regardless of the weather conditions.

Another characteristic that sets these models apart is their sleek and modern design. They are available in a variety of finishes, allowing them to integrate seamlessly with different architectural styles and landscape designs. This versatility in aesthetics means that whether a home has a contemporary look or a traditional feel, these fixtures can enhance its curb appeal.

Technologically, both the 5408 and 5410 are compatible with energy-efficient LED bulbs, providing bright illumination while consuming less power. This feature aligns with the growing trend of environmentally friendly solutions, making them an excellent choice for eco-conscious homeowners.

In summary, the Heath Zenith 5408 and 5410 are versatile outdoor lighting solutions that combine advanced motion detection technology, customizable settings, durability, and energy efficiency. Their modern design and robust features make them an ideal choice for enhancing outdoor safety and security. With these models, homeowners can enjoy peace of mind while beautifying their outdoor spaces.